HP 507283-001 146GB 10000 RPM SAS 2.5" internal hard drive
- Bare Drive
- SATA
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Yottamaster
Aluminium enclosure holds one M.2 NVME drive up to 4 TB, delivers 10 Gbps USB 3.1 Gen 2 speeds with UASP and TRIM, includes RGB lighting and a 2-in-1 USB-C/A cable supporting 60 W PD charging
Material Aluminum
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
Size M.2 NVME 10GBPS
الإصدارات المشطوبة موجودة، لكنها غير متوفرة هنا.
The Yottamaster M.2 enclosure connects a single NVMe SSD over USB 3.1 Gen 2 at 10Gbps. An aluminum body with thermal pad and fin structure keeps the drive under 53°C after 24 hours of full workload. RGB lighting on the top adds a gaming accent. A 2-in-1 USB-C to USB-C/A cable with 60W Power Delivery is included.
This enclosure fits 2230, 2242, 2260 and 2280 M-Key or B+M-Key NVMe SSDs up to 4TB. UASP and TRIM support maintain performance on Windows, Mac and Linux. Buyers who need Thunderbolt 3 connectivity or a built-in cooling fan should look at other designs. The single-bay layout also means only one drive can be used at a time.
The external connection tops out at 10Gbps, delivering real-world sequential speeds up to 985MB/s with a capable NVMe drive. This bandwidth ceiling is the deciding factor: if your workflow demands Thunderbolt or USB4 speeds, this enclosure will not meet that need.
| Series | M.2 NVME 10GBPS |
|---|---|
| Model | M.2 NVME 10GBPS |
| Color | Silver |
| Size | M.2 NVME 10GBPS |
| Type | Enclosure |
| Material | Aluminum |
| Thunderbolt 3 | NO |
| Internal Interface | M.2 NVME 10GBPS |
| External Interface | NVME 10GBPS |
| HDD Count Supported | Single HDD |
| Number of Bay | 1 |
| Fan | No |
| Features | M.2 NVME 10GBPS |
Slide the 2230, 2242, 2260 or 2280 M-Key or B+M-Key drive into the M.2 slot, secure it with the screw, then apply the thermal pad onto the controller before closing the aluminum sandwich case — skipping the pad is the common mistake.
The thermal pad can dry out after long use; replace it with a same-thickness pad to keep the 10 °C – 30 °C cooling effect and maintain the under-53 °C temperature after 24 hours of full workload.
The thermal ceiling: the enclosure is rated to stay under 53 °C after 24 hours of continuous full-load operation, so prolonged writes will hit that temperature ceiling before the 10 Gbps USB 3.1 Gen 2 interface saturates.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟