نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 80 by 25 millimetre case fan with two wires

Zyvpee

Zyvpee FD248025EB-N 24V 0.23A 80*25mm case fan

SKU CH-HW1E-C08AV

A 24 V DC inverter case fan with ball bearing, 80*25 mm size and two-wire power connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • 24 V DC power suits inverter cooling systems
  • Ball bearing design extends operational lifespan
  • 80 mm by 25 mm frame fits standard case mounts
  • Two wire connector simplifies installation wiring
  • Non LED black finish keeps builds subtle

Zyvpee FD248025EB-N 24V case fan

The Zyvpee FD248025EB-N is a new 80*25mm case fan that runs on 24V at 0.23A. It uses a ball bearing and a two-wire power connector for direct DC supply. The black, non-LED frame is built for inverter cooling inside compatible cases.

Suits builds with a 24 V DC source

This fan suits integrators who have a 24 V rail available and need a compact 80 mm cooler. It is not for builders who only have standard motherboard headers, anyone who requires PWM speed control, or users wanting addressable lighting. The two-wire design offers no speed signal or variable control.

24 V 0.23 A two-wire power requirement

The single specification that decides fit is the 24V 0.23A two-wire input. Verify that your system delivers exactly that voltage and connector type before purchase. Mismatched voltage or a missing 24 V rail will prevent the fan from operating.

أبرز المميزات

  • 24 V DC power suits inverter cooling systems
  • Ball bearing design extends operational lifespan
  • 80 mm by 25 mm frame fits standard case mounts
  • Two wire connector simplifies installation wiring
  • Non LED black finish keeps builds subtle

المواصفات

BrandZyvpee
SeriesFD248025EB-N
ModelFD248025EB-N
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC Inverter Fan
Dimensions80*25mm

أسئلة حول هذا المنتج

How do I mount the FD248025EB-N 80*25mm case fan and which wiring mistake should I avoid?

Align the four screw holes on the 80 mm frame with your case fan mounts, then connect the two wires to a 24 V DC source observing the correct polarity; reversing the leads will prevent the fan from spinning.

What part of the FD248025EB-N is most likely to need replacement after long-term use?

The ball bearing is the only moving component subject to wear; after extended operation it may develop noise or increased friction and would then require a full fan replacement.

At what point does the FD248025EB-N hit its thermal limit during continuous running?

The fan is rated for 24 V at 0.23 A; sustained operation beyond this voltage or current will cause overheating of the motor windings before any other limit is reached.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.