暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 80 by 25 millimetre case fan with two wires

Zyvpee

Zyvpee FD248025EB-N 24V 0.23A 80*25mm case fan

SKU CH-HW1E-C08AV

A 24 V DC inverter case fan with ball bearing, 80*25 mm size and two-wire power connector

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeBall
  • Power Connector2 Wires
  • ColorBlack
  • LEDNon-LED
  • 24 V DC power suits inverter cooling systems
  • Ball bearing design extends operational lifespan
  • 80 mm by 25 mm frame fits standard case mounts
  • Two wire connector simplifies installation wiring
  • Non LED black finish keeps builds subtle

Zyvpee FD248025EB-N 24V case fan

The Zyvpee FD248025EB-N is a new 80*25mm case fan that runs on 24V at 0.23A. It uses a ball bearing and a two-wire power connector for direct DC supply. The black, non-LED frame is built for inverter cooling inside compatible cases.

Suits builds with a 24 V DC source

This fan suits integrators who have a 24 V rail available and need a compact 80 mm cooler. It is not for builders who only have standard motherboard headers, anyone who requires PWM speed control, or users wanting addressable lighting. The two-wire design offers no speed signal or variable control.

24 V 0.23 A two-wire power requirement

The single specification that decides fit is the 24V 0.23A two-wire input. Verify that your system delivers exactly that voltage and connector type before purchase. Mismatched voltage or a missing 24 V rail will prevent the fan from operating.

特長

  • 24 V DC power suits inverter cooling systems
  • Ball bearing design extends operational lifespan
  • 80 mm by 25 mm frame fits standard case mounts
  • Two wire connector simplifies installation wiring
  • Non LED black finish keeps builds subtle

仕様

BrandZyvpee
SeriesFD248025EB-N
ModelFD248025EB-N
TypeCase Fan
CompatibilityCase
Bearing TypeBall
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesDC Inverter Fan
Dimensions80*25mm

この商品に関する質問

How do I mount the FD248025EB-N 80*25mm case fan and which wiring mistake should I avoid?

Align the four screw holes on the 80 mm frame with your case fan mounts, then connect the two wires to a 24 V DC source observing the correct polarity; reversing the leads will prevent the fan from spinning.

What part of the FD248025EB-N is most likely to need replacement after long-term use?

The ball bearing is the only moving component subject to wear; after extended operation it may develop noise or increased friction and would then require a full fan replacement.

At what point does the FD248025EB-N hit its thermal limit during continuous running?

The fan is rated for 24 V at 0.23 A; sustained operation beyond this voltage or current will cause overheating of the motor windings before any other limit is reached.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。