نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Black 60×25 mm Maglev case fan, 2-wire 12 V 2.8 W

Zyvpee

Zyvpee KDE1206PTVX 60×25 mm 2-wire 12 V 2.8 W case fan

SKU CH-SC7S-ZXC3P

60×25 mm maglev case fan runs at 1600-1999 RPM on 12 V and 2.8 W with a two-wire connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM1600-1999 RPM
  • Power Connector2 Wires
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V, 2.8 W draw keeps power use low
  • 60 mm × 25 mm frame fits tight CPU cooler mounts
  • 1600–1999 RPM range delivers focused airflow
  • Two-wire connector simplifies installation on standard headers

60×25 mm Maglev CPU cooler fan

The Zyvpee KDE1206PTVX is a 60 mm by 25 mm case fan built for CPU cooler mounting. It runs on 12 V DC and draws 2.8 W through a two-wire power connector. The maglev bearing keeps rotational friction low across the 1600 to 1999 RPM range. Black, non-LED blades suit builds that prefer no lighting.

Two-wire power and maglev bearing

The two-wire lead delivers power only, so speed reporting or PWM control is not available. Maglev suspension reduces contact wear compared with sleeve or ball bearings, extending service life in continuous operation. No extra cables, adapters or mounting screws are mentioned in the supplied data.

Compact frame for tight cooler stacks

At 60 mm square and 25 mm thick, the frame fits slim tower coolers or small-form-factor chassis where larger fans cannot clear memory or VRM heatsinks. The standard 60 mm hole spacing matches common CPU cooler brackets. Buyers who need PWM speed curves or a three- or four-pin header should look elsewhere.

أبرز المميزات

  • Maglev bearing reduces friction for quieter operation
  • 12 V, 2.8 W draw keeps power use low
  • 60 mm × 25 mm frame fits tight CPU cooler mounts
  • 1600–1999 RPM range delivers focused airflow
  • Two-wire connector simplifies installation on standard headers

المواصفات

BrandZyvpee
SeriesKDE1206PTVX
ModelKDE1206PTVX
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM1600-1999 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*25MM

أسئلة حول هذا المنتج

How long does the Maglev bearing in the KDE1206PTVX last before it needs replacement?

Maglev bearings use magnetic levitation to eliminate physical contact, so they typically run for many years without wear and rarely require replacement under normal use.

What limits the KDE1206PTVX first when it runs continuously at 1600-1999 RPM?

The 2.8 W power ceiling and 12 V supply cap the maximum speed, so the fan cannot exceed the stated RPM range even under sustained load.

How much heat and noise does the 2.8 W KDE1206PTVX produce during all-day operation?

At 2.8 W the fan adds very little heat to the case, and the Maglev design keeps acoustic output low even at the top of the 1600-1999 RPM range.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.