暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Black 60×25 mm Maglev case fan, 2-wire 12 V 2.8 W

Zyvpee

Zyvpee KDE1206PTVX 60×25 mm 2-wire 12 V 2.8 W case fan

SKU CH-SC7S-ZXC3P

60×25 mm maglev case fan runs at 1600-1999 RPM on 12 V and 2.8 W with a two-wire connector

  • TypeCPU Cooler Fan
  • CompatibilityCPU Cooler
  • Bearing TypeMaglev
  • RPM1600-1999 RPM
  • Power Connector2 Wires
  • ColorBlack
  • Maglev bearing reduces friction for quieter operation
  • 12 V, 2.8 W draw keeps power use low
  • 60 mm × 25 mm frame fits tight CPU cooler mounts
  • 1600–1999 RPM range delivers focused airflow
  • Two-wire connector simplifies installation on standard headers

60×25 mm Maglev CPU cooler fan

The Zyvpee KDE1206PTVX is a 60 mm by 25 mm case fan built for CPU cooler mounting. It runs on 12 V DC and draws 2.8 W through a two-wire power connector. The maglev bearing keeps rotational friction low across the 1600 to 1999 RPM range. Black, non-LED blades suit builds that prefer no lighting.

Two-wire power and maglev bearing

The two-wire lead delivers power only, so speed reporting or PWM control is not available. Maglev suspension reduces contact wear compared with sleeve or ball bearings, extending service life in continuous operation. No extra cables, adapters or mounting screws are mentioned in the supplied data.

Compact frame for tight cooler stacks

At 60 mm square and 25 mm thick, the frame fits slim tower coolers or small-form-factor chassis where larger fans cannot clear memory or VRM heatsinks. The standard 60 mm hole spacing matches common CPU cooler brackets. Buyers who need PWM speed curves or a three- or four-pin header should look elsewhere.

特長

  • Maglev bearing reduces friction for quieter operation
  • 12 V, 2.8 W draw keeps power use low
  • 60 mm × 25 mm frame fits tight CPU cooler mounts
  • 1600–1999 RPM range delivers focused airflow
  • Two-wire connector simplifies installation on standard headers

仕様

BrandZyvpee
SeriesKDE1206PTVX
ModelKDE1206PTVX
TypeCPU Cooler Fan
CompatibilityCPU Cooler
Bearing TypeMaglev
RPM1600-1999 RPM
Power Connector2 Wires
ColorBlack
LEDNon-LED
FeaturesCPU Cooling
Dimensions60*25MM

この商品に関する質問

How long does the Maglev bearing in the KDE1206PTVX last before it needs replacement?

Maglev bearings use magnetic levitation to eliminate physical contact, so they typically run for many years without wear and rarely require replacement under normal use.

What limits the KDE1206PTVX first when it runs continuously at 1600-1999 RPM?

The 2.8 W power ceiling and 12 V supply cap the maximum speed, so the fan cannot exceed the stated RPM range even under sustained load.

How much heat and noise does the 2.8 W KDE1206PTVX produce during all-day operation?

At 2.8 W the fan adds very little heat to the case, and the Maglev design keeps acoustic output low even at the top of the 1600-1999 RPM range.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。