Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 4GB DDR3 1333MHz PC3-10600 240-Pin DIMM desktop RAM

SKU CH-DSWH-MSVFH

A 4 GB DDR3 desktop module running at 1333 MHz with CL9 timing and 1.5 V operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity adds headroom for everyday multitasking
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • CL9 latency at 1.5 V standard voltage
  • 240-pin unbuffered DIMM fits desktop slots
  • Tested replacement for HP part 497158-B88

Compatible DDR3 Upgrade

This 4 GB DDR3 module runs at 1333 MHz with PC3-10600 timing and CL9 latency. It is an unbuffered non-ECC DIMM designed for desktop systems and serves as a direct replacement for HP part 497158-B88.

240-Pin Standard DIMM

The stick uses the 240-pin DDR3 form factor and operates at the standard 1.5 V, so it fits any desktop slot wired for DDR3 without adapters. Major-brand chips are used throughout and every unit undergoes quality-assurance testing before shipment.

Low-Voltage Efficiency

At 1.50 V the module draws only the power defined by the DDR3 specification, keeping heat output modest and fan noise unchanged during typical desktop workloads. The standard voltage also ensures broad compatibility with AMD and Intel platforms that support DDR3 memory.

Přednosti

  • 4GB capacity adds headroom for everyday multitasking
  • 1333 MHz DDR3 speed matches PC3-10600 spec
  • CL9 latency at 1.5 V standard voltage
  • 240-pin unbuffered DIMM fits desktop slots
  • Tested replacement for HP part 497158-B88

Specifikace

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Otázky k tomuto produktu

Will this 240-pin DDR3 DIMM fit my HP desktop that originally used part 497158-B88?

Yes — the module is listed as a compatible equivalent for HP 497158-B88 and uses the same 240-pin DDR3 form factor.

My motherboard only supports 1.5 V DDR3; is this kit within that limit?

The DIMM runs at the standard 1.50 V DDR3 voltage, matching the 1.5 V requirement.

I need a single 4 GB stick for a dual-channel board; will this work?

This is a single 4 GB module (1 x 4 GB) and is unbuffered non-ECC, so it can populate one slot of a dual-channel desktop board.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.