Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR3 ECC UDIMM sticks, 240-pin, silver contacts

A-Tech

A-Tech 8GB (2x4GB) DDR3 1600 ECC UDIMM 2Rx8 1.5V 240-Pin Server RAM

SKU CH-J528-EY8VJ

Dual-channel 8 GB DDR3-1600 ECC unbuffered kit for compatible servers and workstations

  • Capacity8GB (2 x 4GB)
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredUnbuffered

Capacity 8GB (2 x 4GB)

Speed DDR3 1600 (PC3 12800)

  • ECC protection guards data integrity in server workloads
  • Dual-channel 8 GB kit (2 × 4 GB) doubles memory bandwidth
  • DDR3-1600 CL11 at standard 1.5 V runs cool and stable
  • Unbuffered 240-pin UDIMM fits compatible DDR3 servers and workstations
  • Major-brand chips tested for reliable long-term operation

Server DDR3 ECC UDIMM Kit

This A-Tech kit provides 8 GB of DDR3 ECC unbuffered memory in a matched pair of 4 GB modules. It runs at 1600 MHz with CL11 latency at the standard 1.5 V. The dual-rank x8 organisation and 240-pin DIMM form factor are built for server and workstation platforms that support PC3-12800E specifications.

For DDR3 Servers and Workstations Only

The modules are validated for systems that accept DDR3 ECC UDIMMs and will not function in desktop or laptop computers. They are also unsuitable for platforms requiring registered DIMMs or any memory generation other than DDR3. Buyers needing higher capacities, different voltages, or non-ECC memory should select alternative kits.

ECC Unbuffered DDR3 1600 MHz

The defining specification is the combination of ECC error correction with unbuffered signalling at the DDR3 1600 speed grade. Only motherboards explicitly listing PC3-12800E UDIMM support can use this kit; registered or non-ECC slots will not accept it.

Přednosti

  • ECC protection guards data integrity in server workloads
  • Dual-channel 8 GB kit (2 × 4 GB) doubles memory bandwidth
  • DDR3-1600 CL11 at standard 1.5 V runs cool and stable
  • Unbuffered 240-pin UDIMM fits compatible DDR3 servers and workstations
  • Major-brand chips tested for reliable long-term operation

Specifikace

BrandA-Tech
SeriesA-Tech DDR3 Server Memory RAM
ModelA-Tech 4GB 2Rx8 PC3-12800E
Capacity8GB (2 x 4GB)
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What motherboard slot and memory type does this 240-pin DDR3 ECC UDIMM kit require?

Your motherboard must provide DDR3 DIMM slots that accept 240-pin unbuffered ECC modules running at 1.5 V.

Will these CL11 1600 MHz modules down-clock if I keep slower DDR3 DIMMs already installed?

Yes, the kit will run at the speed and timings of the slowest installed modules when mixed with existing DDR3 memory.

How can I confirm the dual-channel kit is detected at 1600 MHz with ECC active?

Check the BIOS memory information or run a system utility such as dmidecode to verify 1600 MT/s, CL11, and ECC enabled on both modules.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.