Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR4 ECC registered DIMMs, 288-pin, no heat spreaders

A-Tech

A-Tech 8GB (2x4GB) DDR4 2133 ECC RDIMM 1Rx8 CL15 1.2V server RAM

SKU CH-B6W0-C3MDW

An 8 GB dual-channel DDR4 2133 ECC registered DIMM kit for servers and workstations

  • Capacity8GB (2 x 4GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes

Capacity 8GB (2 x 4GB)

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • Single-rank 1Rx8 layout enables higher-density configurations
  • DDR4 2133 speed with CL15 latency delivers responsive throughput
  • Dual-channel 2×4 GB kit doubles bandwidth over single modules

Server DDR4 kit for ECC workloads

This 8 GB kit contains two 4 GB registered DIMMs built for DDR4 servers and workstations that require error-correcting memory. Each module is a single-rank 1Rx8 design running at 2133 MHz with CL15 latency. The kit is not compatible with desktop or laptop platforms.

Sustained operation with registered buffering

The registered buffer reduces electrical load on the memory controller, helping stability during continuous multi-threaded workloads. ECC circuitry detects and corrects single-bit errors without halting the system. Standard 1.2 V operation keeps power draw predictable under load.

288-pin DDR4 ECC RDIMM form factor

Only systems that accept DDR4 288-pin registered ECC modules can use this kit. Buyers whose motherboards require unbuffered UDIMMs or a different DDR generation cannot install these modules.

Přednosti

  • ECC protection prevents data errors in critical workloads
  • Registered design stabilises signal integrity on multi-module servers
  • Single-rank 1Rx8 layout enables higher-density configurations
  • DDR4 2133 speed with CL15 latency delivers responsive throughput
  • Dual-channel 2×4 GB kit doubles bandwidth over single modules

Specifikace

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 4GB 1Rx8 PC4-2133P-R
Part NumberAT4G2D4D2133RS8N12V
Capacity8GB (2 x 4GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
Multi-channel KitDual Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips / Error Correcting Technology for Server Systems

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 1.2 V registered ECC modules add noticeable heat or fan noise when the server runs continuously?

The kit operates at the standard DDR4 voltage of 1.20 V and has no heat spreader, so thermal output stays within normal DDR4 limits for registered DIMMs.

My motherboard has 288-pin DDR4 slots — is anything else required for these RDIMMs to work?

You need a server or workstation platform that explicitly supports DDR4 ECC registered memory; desktop and laptop boards will not accept these modules.

Can I mix this 1Rx8 CL15 kit with existing single-rank DDR4 ECC RDIMMs of a different capacity?

Mixing ranks and capacities is possible only if the system manual approves the specific population rules for your server or workstation.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.