Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Rectangular aluminium chassis, dual front and rear fans, integrated power supply cables

AFRNDK

AFRNDK Antminer L3++ 580MH/s Scrypt Mining Hardware

SKU CH-ZNMK-XS6YS

Scrypt ASIC miner delivering 580 MH/s at 942 W with dual fans rated at 76 dB, Ethernet connectivity, and 288 BM1485 chips across four hash boards

  • Crypto AlgorithmScrypt
  • Compatible CurrencyLTC Dogecoin
  • Hashrate580MH/s
  • Network ConnectionEthernet
  • Noise level76dB
  • Fan2
  • Scrypt ASIC delivers 580 MH/s for Litecoin and Dogecoin mining
  • BM1485 chip array with 288 chips provides high hash-rate efficiency
  • 942 W power draw at 1.62 J/MH keeps energy costs predictable
  • Dual-fan aluminium chassis with independent heatsinks maintains 76 dB noise level
  • Ethernet connectivity and 0–40 °C operating range suit continuous farm deployment

Scrypt ASIC Miner for Litecoin and Dogecoin

This unit delivers a 580 MH/s hashrate on the Scrypt algorithm using 288 BM1485 chips. It targets miners who want a dedicated ASIC for Litecoin and Dogecoin rather than GPU-based rigs. The hardware ships with a power supply and cables included.

Upgrade from older Scrypt ASICs

The L3++ replaces earlier Antminer L3 and L3+ models with higher hash density and 1.62 J/MH efficiency at the wall. The jump is worth it when your electricity cost makes the 942 W draw sustainable and you need the 580 MH/s throughput in a single chassis.

Check power and environment before ordering

Verify you can supply 11.60–13.00 V DC at the required amperage and that ambient temperature stays between 0 °C and 40 °C. The 76 dB noise level and dual-fan airflow demand adequate ventilation. Each of the four hash boards must connect to a single power source per board.

Přednosti

  • Scrypt ASIC delivers 580 MH/s for Litecoin and Dogecoin mining
  • BM1485 chip array with 288 chips provides high hash-rate efficiency
  • 942 W power draw at 1.62 J/MH keeps energy costs predictable
  • Dual-fan aluminium chassis with independent heatsinks maintains 76 dB noise level
  • Ethernet connectivity and 0–40 °C operating range suit continuous farm deployment

Specifikace

BrandBitmain
SeriesAntminer l3
Modelantminer l3++
Crypto AlgorithmScrypt
Compatible CurrencyLTC Dogecoin
Hashrate580MH/s
Network ConnectionEthernet
Noise level76dB
Fan2
Power Consumption942W

Otázky k tomuto produktu

What DC voltage range does the Antminer L3++ require?

The unit accepts 11.60 V to 13.00 V DC input. Use a power supply that stays within this window for stable operation.

How do I connect the four hash boards to the PSU without causing a fault?

Power each of the four hash boards from a single, independent PSU output. Do not split one board across multiple PSU cables and do not share a PSU cable between two boards.

When should I replace the two cooling fans on the L3++?

Replace the fans if noise rises above the rated 76 dB, if RPM drops noticeably, or if the miner reaches the 40 °C operating limit during normal use.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.