Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR3 DIMM sticks with black chips

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM Kit for eMachines EL1352G

SKU CH-18SN-ZENXK

4GB dual-channel DDR3 kit running at 1333 MHz with CL9 timing and 1.5 V, supplied as two 240-pin unbuffered DIMMs validated for the eMachines EL1352G desktop

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4GB kit upgrades eMachines EL1352G desktop
  • Two 2GB modules enable dual-channel DDR3 bandwidth
  • 1333 MHz CL9 timing matches system spec
  • 5 V unbuffered non-ECC DIMMs fit standard slots
  • 240-pin DDR3 form factor installs without adapters

System-specific DDR3 kit for eMachines EL1352G

This 4 GB kit contains two 2 GB unbuffered DIMMs built to run at 1333 MHz with CL9 timing at 1.5 V. It is validated for the eMachines EL1352G desktop so buyers can install it without guessing compatibility.

Two matched modules remove single-channel bottleneck

The paired sticks let the memory controller operate in dual-channel mode, doubling the data path compared with a single module. No heat spreaders are included, keeping the profile low for tight chassis clearance.

DDR3 1333 interface caps peak bandwidth at PC3-10600

The 240-pin DDR3 standard used here tops out at 10600 MB/s theoretical throughput, so workloads that need higher sustained rates will hit this ceiling. Systems requiring ECC or registered memory cannot use this unbuffered non-ECC kit.

Přednosti

  • 4GB kit upgrades eMachines EL1352G desktop
  • Two 2GB modules enable dual-channel DDR3 bandwidth
  • 1333 MHz CL9 timing matches system spec
  • 5 V unbuffered non-ECC DIMMs fit standard slots
  • 240-pin DDR3 form factor installs without adapters

Specifikace

BrandComputer Memory Solutions
ModelCM2566410600DIMM
Capacity4GB (2 x 2GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemEmachines El1352G Desktop
Package Content2 Memory RAM Sticks

Otázky k tomuto produktu

Will the 240-pin DDR3 modules need any cleaning or replacement after long-term use?

No routine cleaning or replacement is required; the unbuffered non-ECC DIMMs have no moving parts and carry a limited lifetime warranty from Computer Memory Solutions.

What is the first limit reached when the 1333 MHz CL9 kit runs continuously at full load?

The DDR3-10600 speed rating and CL9 timing set the maximum sustained throughput; the memory controller will throttle before the modules themselves hit a thermal or electrical limit.

How much heat and power do the 1.5 V sticks produce when the eMachines EL1352G runs all day?

Each 2 GB module operates at 1.5 V without a heat spreader, so power draw stays low and passive case airflow is normally sufficient to keep temperatures in check.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.