暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM Kit for eMachines EL1352G

SKU CH-18SN-ZENXK

4GB dual-channel DDR3 kit running at 1333 MHz with CL9 timing and 1.5 V, supplied as two 240-pin unbuffered DIMMs validated for the eMachines EL1352G desktop

  • Capacity4GB (2 x 2GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 4GB kit upgrades eMachines EL1352G desktop
  • Two 2GB modules enable dual-channel DDR3 bandwidth
  • 1333 MHz CL9 timing matches system spec
  • 5 V unbuffered non-ECC DIMMs fit standard slots
  • 240-pin DDR3 form factor installs without adapters

System-specific DDR3 kit for eMachines EL1352G

This 4 GB kit contains two 2 GB unbuffered DIMMs built to run at 1333 MHz with CL9 timing at 1.5 V. It is validated for the eMachines EL1352G desktop so buyers can install it without guessing compatibility.

Two matched modules remove single-channel bottleneck

The paired sticks let the memory controller operate in dual-channel mode, doubling the data path compared with a single module. No heat spreaders are included, keeping the profile low for tight chassis clearance.

DDR3 1333 interface caps peak bandwidth at PC3-10600

The 240-pin DDR3 standard used here tops out at 10600 MB/s theoretical throughput, so workloads that need higher sustained rates will hit this ceiling. Systems requiring ECC or registered memory cannot use this unbuffered non-ECC kit.

特長

  • 4GB kit upgrades eMachines EL1352G desktop
  • Two 2GB modules enable dual-channel DDR3 bandwidth
  • 1333 MHz CL9 timing matches system spec
  • 5 V unbuffered non-ECC DIMMs fit standard slots
  • 240-pin DDR3 form factor installs without adapters

仕様

BrandComputer Memory Solutions
ModelCM2566410600DIMM
Capacity4GB (2 x 2GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemEmachines El1352G Desktop
Package Content2 Memory RAM Sticks

この商品に関する質問

Will the 240-pin DDR3 modules need any cleaning or replacement after long-term use?

No routine cleaning or replacement is required; the unbuffered non-ECC DIMMs have no moving parts and carry a limited lifetime warranty from Computer Memory Solutions.

What is the first limit reached when the 1333 MHz CL9 kit runs continuously at full load?

The DDR3-10600 speed rating and CL9 timing set the maximum sustained throughput; the memory controller will throttle before the modules themselves hit a thermal or electrical limit.

How much heat and power do the 1.5 V sticks produce when the eMachines EL1352G runs all day?

Each 2 GB module operates at 1.5 V without a heat spreader, so power draw stays low and passive case airflow is normally sufficient to keep temperatures in check.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。