Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Creality K2 Combo FDM printer, 260mm cube build, CFS multicolor unit, grey frame, touchscreen

Creality

Creality K2 Combo 3D Printer 1002110058 260mm Build CFS

SKU CH-9VFB-RC6GM MPN 1002110058

Prints FDM parts up to 260 × 260 × 260 mm at 600 mm/s with step-servo motors and ships with one CFS for multicolour printing

  • Type3D Printer
  • TechnologyFDM (Fused Deposition Modeling)
  • Number of ExtrudersDual-gear direct drive extruder
  • Build SizeBuild Volume: 260 x 260 x 260 mm
  • FeaturesK2 SPECIFICATIONS Printing Technology: Fused Deposition Mode

Model K2 Combo

  • Multicolor prints with included CFS unit expandable to 16 colors
  • 260 x 260 x 260 mm build volume on steel X-axis rail and dual Z-axis
  • Smart auto leveling probes only model area for faster even first layer
  • 720P chamber camera enables failure detection plate checks and time-lapse filming
  • 600 mm/s max speed with 20000 mm/s² acceleration driven by step-servo motors

K2 Combo FDM 3D printer for multicolor makers

The Creality K2 Combo uses fused deposition modeling with a dual-gear direct drive extruder and a build volume of 260 x 260 x 260 mm. It ships with one Creality Filament System unit for multicolor and multi-material printing, expandable to four units for up to 16 colors in a single print. Step-servo motors on the XY axes and extruder deliver a maximum printing speed of 600 mm/s and acceleration of 20000 mm/s².

Upgrade from single-color FDM machines when you

This printer replaces single-extruder systems that require manual filament swaps for color changes. The integrated CFS automates filament switching, making the jump worthwhile for users printing multi-color models or combining materials such as PLA, PETG, ABS, PLA-CF and PET-CF. Smart auto leveling probes only the print area for a faster first layer, while the 720P chamber camera adds failure detection and time-lapse recording.

Fits a workshop bench

The unit operates on 100-240V AC at 50/60 Hz, drawing 1350W at 220V or 450W at 110V. A 4-inch color touch screen handles local control, and files transfer via USB drive or WiFi to 8GB eMMC storage. The heated bed reaches 100 °C and the nozzle 300 °C, supported by an enclosed chamber with an air purifier, power loss recovery, input shaping and built-in lighting.

Přednosti

  • Multicolor prints with included CFS unit expandable to 16 colors
  • 260 x 260 x 260 mm build volume on steel X-axis rail and dual Z-axis
  • Smart auto leveling probes only model area for faster even first layer
  • 720P chamber camera enables failure detection plate checks and time-lapse filming
  • 600 mm/s max speed with 20000 mm/s² acceleration driven by step-servo motors

Specifikace

BrandCreality
ModelK2 Combo
Type3D Printer
TechnologyFDM (Fused Deposition Modeling)
Number of ExtrudersDual-gear direct drive extruder
Build SizeBuild Volume: 260 x 260 x 260 mm
FeaturesK2 SPECIFICATIONS
Printing Technology: Fused Deposition Modeling
Printing Speed: max 600 mm/s
Acceleration: max 20000 mm/s2
Printing Accuracy: 100±0.1 mm
Layer Height: 0.05-0.3 mm
Filament Diameter: 1.75 mm
Nozzle Diameter: 0.4 mm
Nozzle Temperature: max 300 °C
Heatbed Temperature: max 100 °C
Build Plate: Flexible PEI build plate
Leveling Mode: Full-auto leveling
XYE Motor: Step-servo motors for XY axis and extruder
File Transfer: USB Drive / WiFi
File Storage: 8GB EMMC
Rated Voltage: 100-240V ~ AC 50/60Hz
Display Screen: 4" color touch screen
Rated Power: 1350W (220V), 450W (110V)
S
Přepravní hmotnost29.89 kg
Rozměry balení630 × 516 × 498 mm

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What are the build-volume dimensions so I can check desk space?

The build volume is 260 x 260 x 260 mm, and the printer includes a 4-inch colour touch screen and a built-in 720P chamber camera that adds to the overall footprint.

What is the correct way to load filament into the CFS unit?

Insert 1.75 mm filament into the CFS inlet, select "Load" on the touch screen, and wait for the dual-gear direct drive extruder to grip and pull it through to the 0.4 mm nozzle.

Which parts will need replacement after extended printing?

The 0.4 mm nozzle, flexible PEI build plate, and air-purifier filter are consumables that wear over time; the dual-gear direct drive extruder gears may also require inspection.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.