Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Half-height blade server, silver metal chassis, front drive bays and network ports visible

DELL

DELL PowerEdge M640 Blade Server 2x Xeon Gold 6154 18C 16GB DDR4 2x 960GB SSD H330 57810S-K iDRAC9 Ent

SKU CH-PBJB-T3N6Z

Half-height blade server with dual 18-core Xeon Gold 6154 processors, 16GB DDR4, dual 960GB SSDs, H330 RAID and iDRAC9 Enterprise

  • TypeBlade
  • Rack HeightBlade
  • CPU TypeIntel Xeon
  • CPU Speed3.00 GHz
  • CPU SocketLGA 3647
  • Number of CPU Cores18-Core Processor

Installed Memory Size 16GB

SSD (Installed) 2 x 960GB SATA SSD

  • Dual 18-core Xeon Gold 6154 CPUs deliver 36 cores for heavy compute workloads
  • 16GB DDR4 2666MHz ECC memory supports up to 1.5TB for large datasets
  • Dual 960GB SATA SSDs on PERC H330 RAID controller provide fast redundant storage
  • Broadcom 57810S-K dual 10Gb ports enable high-speed network connectivity
  • iDRAC9 Enterprise gives full remote management and automation capabilities

Dense two-socket blade for virtualization and HPC

The PowerEdge M640 is a half-height blade that fits the PowerEdge MX and M1000e chassis. It ships with two Xeon Gold 6154 processors, each 18 cores at 3.0 GHz with 3.7 GHz turbo, and 16 GB of DDR4 2666 MHz registered ECC memory. The platform supports up to 56 cores and 1.5 TB of memory per blade for scale-out deployments.

Dual CPUs and PERC H330 in a shared chassis

Two 18-core CPUs and the H330 controller draw power and reject heat through the enclosure's common cooling infrastructure, so blade-level acoustics and thermals depend on the chassis configuration. The installed 2 x 960 GB SATA SSDs and DDR4 DIMMs add minimal incremental load, while the Matrox G200 graphics subsystem consumes only a few watts.

10 Gb networking and iDRAC9 Enterprise included

A Broadcom 57810S-K dual-port 10 Gb daughter card provides high-speed fabric connectivity without occupying a mezzanine slot. iDRAC9 Enterprise enables full remote management, automation and firmware orchestration across the blade fleet. No operating system, front bezel or ready rails are supplied; buyers who need those items must source them separately.

Přednosti

  • Dual 18-core Xeon Gold 6154 CPUs deliver 36 cores for heavy compute workloads
  • 16GB DDR4 2666MHz ECC memory supports up to 1.5TB for large datasets
  • Dual 960GB SATA SSDs on PERC H330 RAID controller provide fast redundant storage
  • Broadcom 57810S-K dual 10Gb ports enable high-speed network connectivity
  • iDRAC9 Enterprise gives full remote management and automation capabilities

Specifikace

BrandDELL
SeriesPowerEdge M640
TypeBlade
Rack HeightBlade
CPU TypeIntel Xeon
CPU Speed3.00 GHz
CPU SocketLGA 3647
Number of CPU Cores18-Core Processor
# of Processors Installed2
MAX Processors2
Installed Memory Size16GB
Memory TypeDDR4
Max Memory Capacity2TB
Number of Memory Slots16
Storage ControllerDell Perc H330 Controller
HDD InterfaceSATA/SAS
SSD (Installed)2 x 960GB SATA SSD
Raid LevelRAID 0/1/5/10/50
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card
Management PortRJ 45
Operating SystemNo

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How do I install this M640 blade into a PowerEdge MX or M1000e chassis, and what step is often missed?

Slide the half-height blade into an empty bay until the latch clicks, then enable the server in the Chassis Management Controller so iDRAC9 Enterprise gets an IP address; skipping the CMC step leaves the blade invisible to the network.

Which components will need replacement first under continuous operation in this configuration?

The two 960 GB SATA SSDs and the system fans inside the chassis are the primary wear items; SSDs have finite write endurance, and fans accumulate dust, so plan drive health monitoring and periodic fan cleaning.

What thermal or power limit appears first when both Xeon Gold 6154 CPUs run at 3.7 GHz turbo across all 18 cores?

The blade's half-height form factor and shared chassis cooling cap sustained turbo; the system will throttle to 3.0 GHz base frequency once the chassis inlet temperature or power budget is reached.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.