Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Compact jade anodized aluminum Mini-ITX case with solid walnut front panel, no side window, rear SFX PSU mount

Fractal Design

Fractal Design Terra Jade FD-C-TER1N-03 Mini-ITX PC case

SKU CH-7VFF-51S4G MPN FD-C-TER1N-03

A 10.4 L Mini-ITX case with an anodized aluminum front, solid walnut panel, PCIe 4.0 riser and room for 322 mm GPUs

  • TypeSmall Form Factor
  • ColorJade
  • Case MaterialAluminum / Steel
  • With Power SupplyNo
  • Power SupplySFX/SFX-L
  • Power Supply MountedRear

Options Jade

  • Space-saving 10.4 L footprint fits powerful Mini-ITX builds
  • Solid walnut panel adds premium warmth to the aluminium exterior
  • Movable interior wall gives 30 mm extra room for GPU or cooler
  • PCIe 4.0 riser cable included for full-speed graphics connection
  • Two 2.5" drive bays provide fast internal storage capacity

Jade Mini-ITX case for compact builds

The Fractal Design Terra Jade is a 10.4 L small form factor enclosure built from anodized aluminium and steel with a solid walnut accent panel. It accepts Mini-ITX motherboards and uses an SFX or SFX-L power supply mounted at the rear. A PCIe 4.0 riser cable is included so the graphics card sits parallel to the motherboard.

Check GPU height thickness and CPU cooler clearance

In the maximum GPU configuration the case allows cards up to 322 mm long, 131 to 145 mm tall and 62 to 72 mm thick depending on the chosen height. That same layout limits the CPU cooler to 48 mm. Switching to the maximum CPU configuration raises the cooler limit to 77 mm but reduces the expansion slots from three to two. Verify which layout matches your parts before ordering.

Single 120 mm mount handles sustained loads

One 120 mm fan mount sits at the bottom and a side radiator bracket supports a 120 mm unit up to 121 mm wide when the GPU is 200 mm or shorter and no 2.5 inch drives are installed. No fans are pre-installed so you choose the airflow profile. The movable interior wall provides 30 mm of adjustment to balance GPU length against cooler height during extended workloads.

Přednosti

  • Space-saving 10.4 L footprint fits powerful Mini-ITX builds
  • Solid walnut panel adds premium warmth to the aluminium exterior
  • Movable interior wall gives 30 mm extra room for GPU or cooler
  • PCIe 4.0 riser cable included for full-speed graphics connection
  • Two 2.5" drive bays provide fast internal storage capacity

Specifikace

BrandFractal Design
SeriesTerra
ModelFD-C-TER1N-03
TypeSmall Form Factor
ColorJade
Case MaterialAluminum / Steel
With Power SupplyNo
Power SupplySFX/SFX-L
Power Supply MountedRear
Motherboard CompatibilityMini ITX
Side Panelwithout Side Window
Internal 2.5" Drive Bays2 (included)
Expansion Slots3 in Max GPU Config, 2 in Max CPU Config
Front Ports1 x USB 3.2 Gen 2x2 Type-C, 1 x USB 3.0 Type-A,
Fan OptionsTotal fan mounts: 1x 120 mm
Bottom: 1x 120 mm
Pre-installed FansNo Fan Installed
Radiator OptionsSide: 120 mm (Max 121 mm wide w/ GPU up to 200 mm long and no 2.5" drives)
Max GPU Length322 mm
Max GPU Height: 131 - 145 mm depending on thickness
Max GPU Thickness: 62 - 72 mm depending on height (Max GPU config)
Max CPU Cooler Height77 mm in Max CPU config, 48 mm in Max GPU config
Max PSU Length130 mm
Dimensions13.50" x 6.02" x 8.58"
Weight6.83 lbs.
Features• Install your choice of high-performing GPU up to 322 mm in length, in a space-saving 10.4 L case
• Add natural materials to your setup with a front-facing panel cut from FSC-certified solid walnut
• Enjoy a sleek anodized aluminum exterior including an 8 mm-thick aluminum front
• Find your build’s ideal balance with 30 mm of internal flexibility provided by a stepless, slidable central wall
• Front-facing I/O featuring an aluminum power button and two USB ports including one USB Type-C 20Gbps
• Get a head start on your build with the included PCIe 4.0 Riser cable
• Store up to two
Package ContentTerra Case
Accessory box
Manual
Přepravní hmotnost4.31 kg
Rozměry balení403 × 292 × 219 mm

Další verze tohoto modelu

Dalších 2 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will a dual-slot graphics card longer than 322 mm fit inside this case?

No, the maximum supported GPU length is 322 mm. Cards exceeding that dimension will not install.

What CPU cooler height can I use if I also install a full-length graphics card?

In the maximum GPU configuration the cooler clearance is 48 mm, so only low-profile coolers will fit.

Does the case include any pre-installed fans or must I supply my own?

No fans are pre-installed; the chassis provides one 120 mm bottom mount for you to add a fan.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.