FSP
FSP Twins Pro 500W ATX PS2 Hot-Swappable Redundant Module power supply
A hot-swappable 500 W ATX PS2 redundant module with 80 Plus Gold efficiency for continuous server operation
- TypeATX12V / EPS12V
- Maximum Power500 W
- +12V RailsSingle
- Max PSU Length190 mm
- ModularNon-Modular
- Energy-Efficient80 PLUS GOLD Certified
Options ATX PS2 Individual (500W)
- ATX PS2 Individual (900W)
- ATX PS2 Individual (700W)
- ATX PS2 Individual (500W)
- ATX PS2 Dual (900W)
- ATX PS2 Dual (500W)
Přeškrtnuté varianty existují, ale zde nejsou skladem.
- Hot-swappable module keeps servers running during replacement
- 80 PLUS Gold efficiency cuts energy waste at 500 W
- Single 12 V rail delivers stable power to all components
- Compact 190 mm ATX PS2 form factor fits redundant chassis
- Meets UL 62368 safety standard for reliable operation
Replacement Module for Twins Pro 500W
This is a single replacement module designed for the FSP Twins Pro 500W ATX PS2 1+1 redundant power supply. It delivers up to 500 W through a single +12 V rail and meets 80 Plus Gold efficiency with greater than 90 % performance. The unit complies with ATX12V and EPS12V standards and the UL 62368 safety standard.
Who This Suits and Who Should Look Elsewhere
System administrators running servers or workstations that require continuous uptime can hot-swap a failed module without shutting down. Builders assembling a new system or upgrading a non-redundant chassis should look at a standard single-unit power supply instead.
ATX PS2 Redundant Form Factor
The module measures 190 mm in length and follows the ATX PS2 redundant size specification. It is non-modular and built to slot directly into the Twins Pro chassis for tool-free replacement.
Přednosti
- Hot-swappable module keeps servers running during replacement
- 80 PLUS Gold efficiency cuts energy waste at 500 W
- Single 12 V rail delivers stable power to all components
- Compact 190 mm ATX PS2 form factor fits redundant chassis
- Meets UL 62368 safety standard for reliable operation
Specifikace
| Brand | FSP Group |
|---|---|
| Type | ATX12V / EPS12V |
| Maximum Power | 500 W |
| +12V Rails | Single |
| Max PSU Length | 190 mm |
| Modular | Non-Modular |
| Energy-Efficient | 80 PLUS GOLD Certified |
Další verze tohoto modelu
Dalších 3 v této řadě
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
FSP Twins Pro 900W 80 PLUS Gold Redundant Module 190mm
- ATX12V / EPS12V
- 900 W
Otázky k tomuto produktu
What comes with the FSP520-20RAB module and what else is needed for a redundant setup?
The package contains one hot-swappable module rated at 500 W with 80 PLUS Gold efficiency. A second identical module and the Twins PRO 500W chassis are required to form the 1+1 redundant power supply.
Which module variant matches the Twins PRO 500W chassis?
Choose the FSP520-20RAB module; it is the designated replacement for the Twins PRO 500W and delivers the full 500 W capacity with 80 PLUS Gold certification.
What does the 500 W rating mean once the module is installed in a server?
Each module can supply the full 500 W load on its own; during normal operation two modules share the load, and if one fails the other continues delivering up to 500 W without interruption.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 6400MHz CL52 1.1V 2Rx4 288-Pin Supermicro H14SST-GE
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 6400 ECC Registered RDIMM 1.5TB 12x128GB 2Rx4 CL52 1.1V Supermicro H14DSH memory upgrade
- 1.5TB (12 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM DDR5 ECC RDIMM 2TB 16x128GB 6400MHz CL52 1.1V 2Rx4 Supermicro H14DSH
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM






