FSP Twins Pro 500W ATX PS2 Hot-Swappable Redundant Module power supply
- ATX12V / EPS12V
- 500 W
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
FSP
Hot-swappable 700 W ATX PS2 redundant module with 80 Plus Gold efficiency for continuous server uptime
Options ATX PS2 Individual (700W)
Přeškrtnuté varianty existují, ale zde nejsou skladem.
This single module replaces a failed unit inside the FSP Twins Pro 700W redundant power supply. It is designed for system builders and IT staff who need to restore redundancy without swapping the entire chassis. The module fits the ATX PS2 form factor used by the Twins Pro platform. Hot-swap capability lets you exchange it while the system stays online.
The module meets 80 Plus Gold certification with efficiency greater than 90 percent at typical loads. Under normal operation the twin modules share the load evenly, which reduces the current handled by each unit and keeps internal temperatures lower. Hot-swap design means a faulty module can be removed without shutting down the server or workstation. Compliance with UL 62368 confirms the safety envelope for continuous operation.
Swapping in a fresh module instantly returns the power supply to 1+1 redundant mode so the remaining unit no longer carries the full load alone. No additional cables or configuration tools are required because the module uses the existing Twins Pro backplane connectors. The changeover is transparent to the operating system and attached hardware. This keeps servers, workstations and critical home systems running without interruption.
| Brand | FSP Group |
|---|---|
| Type | ATX12V / EPS12V |
| Maximum Power | 700 W |
| Max PSU Length | 190 mm |
| Modular | Non-Modular |
| Energy-Efficient | 80 PLUS GOLD Certified |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Slide the module into the ATX PS2 bay until the latch clicks, then secure the retention screw; the step often missed is tightening that screw, which keeps the hot-swap connector fully seated.
The unit is a field-replaceable module; if a fan bearing wears or efficiency drops below 80 Plus Gold, swap the module without tools — no internal capacitors are user-serviceable.
Thermal protection engages first; the redundant design shares load between two modules, so sustained 700 W on a single module triggers over-temperature shutdown before any electrical limit is reached.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?