FSP Twins Pro 500W ATX PS2 Hot-Swappable Redundant Module power supply
- ATX12V / EPS12V
- 500 W
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
FSP
Hot-swappable 700 W ATX PS2 redundant module with 80 Plus Gold efficiency for continuous server uptime
Options ATX PS2 Individual (700W)
Struck-through versions exist but are not stocked here.
This single module replaces a failed unit inside the FSP Twins Pro 700W redundant power supply. It is designed for system builders and IT staff who need to restore redundancy without swapping the entire chassis. The module fits the ATX PS2 form factor used by the Twins Pro platform. Hot-swap capability lets you exchange it while the system stays online.
The module meets 80 Plus Gold certification with efficiency greater than 90 percent at typical loads. Under normal operation the twin modules share the load evenly, which reduces the current handled by each unit and keeps internal temperatures lower. Hot-swap design means a faulty module can be removed without shutting down the server or workstation. Compliance with UL 62368 confirms the safety envelope for continuous operation.
Swapping in a fresh module instantly returns the power supply to 1+1 redundant mode so the remaining unit no longer carries the full load alone. No additional cables or configuration tools are required because the module uses the existing Twins Pro backplane connectors. The changeover is transparent to the operating system and attached hardware. This keeps servers, workstations and critical home systems running without interruption.
| Brand | FSP Group |
|---|---|
| Type | ATX12V / EPS12V |
| Maximum Power | 700 W |
| Max PSU Length | 190 mm |
| Modular | Non-Modular |
| Energy-Efficient | 80 PLUS GOLD Certified |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Slide the module into the ATX PS2 bay until the latch clicks, then secure the retention screw; the step often missed is tightening that screw, which keeps the hot-swap connector fully seated.
The unit is a field-replaceable module; if a fan bearing wears or efficiency drops below 80 Plus Gold, swap the module without tools — no internal capacitors are user-serviceable.
Thermal protection engages first; the redundant design shares load between two modules, so sustained 700 W on a single module triggers over-temperature shutdown before any electrical limit is reached.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?