Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
A silver ATX power supply with single fan and multiple cables

Gulfe

Gulfe ATX Power Supply for HP Pavilion Elite M9400Z M9402F

SKU CH-18SG-SFXJ7

ATX power supply with reduced depth, 115/230 V input, and 24-pin, 4-pin, SATA, LP4 and floppy connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy HP Elite M9400Z M9402F units
  • Reduced depth 5.9" height fits tight ATX cases
  • Dual 12 V rails with over-current protection
  • 24-pin ATX, 4-pin CPU, three SATA connectors
  • High-efficiency design tested for low ripple noise

Gulfe ATX PSU for HP Pavilion Elite M9400Z M9402F

This new Gulfe ATX power supply replaces legacy units in HP Pavilion Elite M9400Z and M9402F media centre desktops. It delivers standard output rails including +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V standby. Over-current and over-power protection circuits guard connected components. Reduced depth improves fit inside the original chassis.

Fits HP Pavilion Elite M9400Z and M9402F only

Builders restoring these specific HP models can use this unit as a direct swap. Systems requiring different connector layouts, higher total wattage or proprietary form factors should look at other options. The single fan provides basic cooling for the original hardware configuration. This unit does not support modern high-power graphics cards or newer motherboard power standards.

Connector set decides compatibility

The harness includes one 24-pin ATX connector, one 4-pin P4 12V connector, three SATA 15-pin connectors, two LP4 4-pin connectors and one floppy 4-pin connector. Missing PCIe power plugs rule out discrete graphics upgrades. Verify your motherboard and drive requirements against this exact list before purchase.

Přednosti

  • Replaces legacy HP Elite M9400Z M9402F units
  • Reduced depth 5.9" height fits tight ATX cases
  • Dual 12 V rails with over-current protection
  • 24-pin ATX, 4-pin CPU, three SATA connectors
  • High-efficiency design tested for low ripple noise

Specifikace

BrandGulfe
TypeATX
Fans1
Weight2.5

Otázky k tomuto produktu

How long will the power supply maintain output after mains voltage drops?

The unit provides a minimum hold-up time of 17 ms at nominal input, keeping rails alive during brief interruptions.

What noise level and thermal load should I expect when the PSU runs continuously?

A single internal fan cools the unit; the supplier notes low ripple and noise but does not publish a decibel rating or thermal output figure.

Which existing cables or motherboard headers must my system already have for this PSU to connect?

Your motherboard needs a 24-pin ATX socket and a 4-pin P4 12 V header; drives require SATA power ports or LP4 connectors.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.