NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
LORDWORLD
Flexible 64×64 RGB LED matrix with 4096 addressable pixels on a bendable 3 mm pitch PCB, HUB75 chainable for Raspberry Pi, ESP32 and Arduino projects
The LORDWORLD panel packs 4096 addressable RGB LEDs onto a bendable PCB with a 3mm pitch. Makers and developers can curve the 192×192mm surface around cylinders or spheres for custom display projects. It targets hobbyists building animated signs, wearable prototypes, or interactive art installations.
Two HUB75 headers sit on the board — one for data input and one for output — so multiple panels link in series from a single controller. The flexible substrate tolerates gentle bends without trace damage, making curved mounts practical for desktop or wall installations. No rigid frame is required.
At 3mm pixel spacing the 64×64 resolution stays sharp only at close viewing distances; fine text blurs beyond arm's length. Chaining panels increases total pixel count but each added panel raises refresh-rate demand on the host controller. The panel lacks onboard memory or a driver IC, so the host must stream frame data continuously.
| Brand | LORDWORLD |
|---|
The panel uses dual HUB75 headers for input and output, allowing multiple 64×64 panels to be chained together; the practical chain length depends on the controller's RAM and refresh-rate requirements.
The 192×192 mm panel can be gently bent around cylinders or spheres and includes mounting holes for flat wall or desktop installation; allow extra depth for the HUB75 connectors and power wiring.
Connect the input HUB75 header to the controller's GPIO using a compatible adapter or HAT, supply 5 V power separately to the panel's power terminals, and ensure the controller ground is common with the panel ground — the shared ground is the step most often missed.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?