Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with three blue USB ports, one silver Ethernet jack, USB-C power input and four indicator LEDs

LORDWORLD

LORDWORLD USB 3.2 Gen1 Gigabit Ethernet HUB HAT 3x USB 1x LAN development board

SKU CH-JW30-3D6RC

Adds three USB 3.2 Gen1 ports and a Gigabit Ethernet jack to Raspberry Pi boards with driver-free operation and external USB-C power

  • Add three USB 3.2 Gen1 ports for fast peripherals
  • Gigabit Ethernet gives reliable 1000M wired networking
  • External USB-C 5V power port keeps supply stable
  • LED indicators show power and each USB port status
  • Works driver-free on Windows, macOS, Linux and Android

Raspberry Pi 4 expansion HAT

This HAT adds three USB 3.2 Gen1 ports and one Gigabit Ethernet port to a Raspberry Pi 4. It is designed for makers and developers who need extra high-speed peripherals and wired networking on a single board. The board draws power through an onboard USB-C 5 V input for stable operation. Driver-free installation works across Windows, macOS, Linux and Android.

USB 3.2 Gen1 and Gigabit Ethernet limits

Each USB port runs at up to 3.2 Gen1 speeds and remains backward compatible with USB 3.0, 2.0 and 1.1 devices. The Ethernet port negotiates at 1000M, 100M or 10M depending on the connected switch or router. Total bandwidth is shared across the three USB ports and the Ethernet controller through the single upstream link. Cable quality and length will affect the maximum reliable throughput.

Check your Pi model and power budget

Verify that your Raspberry Pi version exposes the required header and that the board fits your enclosure. The external USB-C power port must be supplied with a 5 V source able to handle the combined draw of all attached USB devices. Ensure your operating system includes the standard kernel modules for USB hub and Ethernet functions. Development resources and a manual are included for reference.

Přednosti

  • Add three USB 3.2 Gen1 ports for fast peripherals
  • Gigabit Ethernet gives reliable 1000M wired networking
  • External USB-C 5V power port keeps supply stable
  • LED indicators show power and each USB port status
  • Works driver-free on Windows, macOS, Linux and Android

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

Which USB standard do the three ports on this HAT support?

The three ports are USB 3.2 Gen1 and remain compatible with USB 3.0, 2.0 and 1.1 devices.

What network speed can I expect from the Gigabit Ethernet port on a Raspberry Pi 4?

The port negotiates at 1000M, 100M or 10M; on a Pi 4 the USB 3.2 Gen1 link allows full gigabit throughput.

Does the USB-C power input change the data speed of the hub?

The USB-C 5V DC port supplies extra power only; data still runs over the USB 3.2 Gen1 interface at its normal rate.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.