Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR4 RDIMM modules, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 ECC RDIMM memory upgrade

SKU CH-GN82-83AMA

16 GB DDR4 2400 CL17 ECC registered dual-rank kit for ASRock EPYC motherboards

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 16GB 2X8GB

  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-DIMM workloads
  • 2 V operation reduces power draw and heat
  • 2400 MT/s DDR4 speed matches platform spec
  • 288-pin RDIMM form factor fits EPYC motherboards

16 GB DDR4 ECC RDIMM kit for AMD EPYC servers

This NEMIX RAM kit delivers 16 GB of DDR4 memory in two 8 GB registered DIMMs. It runs at 2400 MT/s with CL17 latency and 1.2 V operation. The modules are designed for compatibility with the ASRock Rack ROMED8-2T motherboard and AMD EPYC platforms. ECC and registered buffering help maintain data integrity in server workloads.

Check motherboard slot count

Verify that your ASRock Rack ROMED8-2T board has free 288-pin DDR4 RDIMM slots before ordering. Confirm the maximum supported capacity per channel and the required population order in the board manual. Ensure the system BIOS is updated to recognise 2400 MT/s registered ECC modules. The kit will not fit consumer UDIMM slots or non-ECC platforms.

Installs alongside existing RDIMMs to expand

The two 8 GB sticks add 16 GB to a registered memory subsystem without occupying additional DIMM slots beyond the pair used. They operate at the standard 1.2 V DDR4 voltage, so no extra power provisioning is needed. The lack of heat spreaders keeps the modules low-profile for dense server chassis. The kit frees budget by using cost-effective 1Rx8 Samsung, Micron or Hynix chips while delivering enterprise-grade reliability.

Přednosti

  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-DIMM workloads
  • 2 V operation reduces power draw and heat
  • 2400 MT/s DDR4 speed matches platform spec
  • 288-pin RDIMM form factor fits EPYC motherboards

Specifikace

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR19200-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2400MHZ PC4-19200 1Rx8 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does the kit include both 8 GB modules or must they be purchased separately?

The kit contains two 8 GB modules giving 16 GB total, no additional parts are required.

Should I choose the 2400 MT/s CL17 version or the 2666 MT/s variant for this server?

This kit is rated at 2400 MT/s CL17; select it when your platform specifies DDR4 2400.

What does the 2400 MT/s rating mean once the modules are installed?

The memory will operate at 2400 MT/s with CL17 latency at 1.20 V on compatible systems.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.