SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00497892BTC
Skladem
NEMIX RAM
NEMIX RAM 16GB DDR4 2933MHz CL21 1Rx8 UDIMM memory upgrade
16GB DDR4 2933MHz CL21 UDIMM built with major OEM chips for verified Supermicro X12SCZ-F and X12SCZ-TLN4F motherboard compatibility
- Capacity16GB
- Type288-Pin DDR4 UDIMM
- SpeedDDR4 2933 (PC4 23400)
- CAS LatencyCL21
- Voltage1.20V
- ECCNo
- Exact-match upgrade for Supermicro X12SCZ-F / X12SCZ-TLN4F motherboards
- 16 GB DDR4 2933 MHz CL21 runs at rated speed and voltage
- 1Rx8 Non-ECC UDIMM fits desktop memory controller without ECC conflicts
- Major OEM chips from Samsung, Micron or Hynix tested for stability
- 288-pin 1.2 V unbuffered module installs in standard desktop DIMM slots
Exact-match DDR4 upgrade
This 16GB DDR4-2933 (PC4-23400) module is built for desktop systems that require a single-rank 1Rx8 Non-ECC UDIMM at 1.2V. It uses the precise timing and voltage the memory controller expects so the full capacity is recognised at the rated speed.
Replaces slower or smaller DIMMs
Upgrading from lower-capacity or slower DDR4 sticks is worthwhile when the motherboard supports DDR4-2933 and the existing configuration leaves free 288-pin slots. The jump adds bandwidth and capacity without changing voltage or form factor.
Check motherboard manual first
Verify that the Supermicro X12SCZ-F or X12SCZ-TLN4F board accepts 16GB Non-ECC UDIMMs in the planned slot order and that the BIOS is current enough to initialise the modules at CL21. Confirm the system does not require ECC or registered memory before ordering.
Přednosti
- Exact-match upgrade for Supermicro X12SCZ-F / X12SCZ-TLN4F motherboards
- 16 GB DDR4 2933 MHz CL21 runs at rated speed and voltage
- 1Rx8 Non-ECC UDIMM fits desktop memory controller without ECC conflicts
- Major OEM chips from Samsung, Micron or Hynix tested for stability
- 288-pin 1.2 V unbuffered module installs in standard desktop DIMM slots
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR4 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD23400-618K1 |
| Capacity | 16GB |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB DDR4 2933MHz PC4-23400 1Rx8 1.2V 288-PIN Non-ECC UDIMM KIT |
Otázky k tomuto produktu
Will this 288-pin DDR4 UDIMM fit the memory slots on my Supermicro X12SCZ-F motherboard?
Yes, the module is a 288-pin DDR4 UDIMM, which is the exact form factor required by the Supermicro X12SCZ-F and X12SCZ-TLN4F motherboards.
What is the correct way to install this 1Rx8 UDIMM, and what step do people often miss?
Align the notch on the module with the slot key, press down firmly until both side clips click shut, then consult your motherboard manual for the approved DIMM population order.
Does this non-ECC DDR4 module need any firmware updates or component replacements over its lifetime?
No, the memory has no firmware and no moving parts; it is a passive component that does not require updates or scheduled replacements.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
