Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Six green DDR5 RDIMM modules in a row, black chips no heat spreaders

NEMIX RAM

NEMIX RAM 192GB (6 x 32GB) DDR5 5600 ECC Registered RDIMM CL46 1.1V Supermicro H14DSG-OD memory upgrade

SKU CH-9B6B-2YT4C

Six 32 GB DDR5-5600 registered ECC RDIMMs at 1.1 V CL46 deliver 192 GB for Supermicro H14DSG-OD servers

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Zobrazit dalších 30 konfigurací
  • 192 GB total capacity across six 32 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD memory slots directly

192GB DDR5 ECC RDIMM kit for Supermicro H14DSG-OD

This 192GB kit contains six 32GB DDR5 5600 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-OD memory controller expects. It is intended for administrators upgrading that specific motherboard to its full supported capacity with matched modules.

Installation notes and common issues

The 288-pin RDIMM form factor fits only the DIMM slots on this board; UDIMM or SODIMM modules will not seat. Populate all six slots following the motherboard manual’s population order so the registered buffer can offload the controller correctly. A mismatch in rank, voltage or CAS latency will prevent the system from posting at the rated 5600 speed.

The deciding specification

The kit runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.1V in a 2Rx8 registered ECC configuration. If your board requires a different speed, voltage, rank structure or unbuffered modules, this kit will not be recognised at full capacity or rated performance.

Přednosti

  • 192 GB total capacity across six 32 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD memory slots directly

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How can I confirm the kit is running at the rated DDR5 5600 speed and CL46 timings after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 5600 MT/s with CAS latency 46; the registered ECC design ensures all six slots operate at full rated speed when populated per the motherboard manual.

What exactly ships in the box and are any extra components required for the Supermicro H14DSG-OD?

The package contains six 32 GB DDR5 288-pin RDIMM modules for a total of 192 GB; no additional parts are needed because the kit matches the board's registered ECC requirements and 1.1 V voltage.

Why choose the 192 GB 6 x 32 GB kit instead of a different capacity for this motherboard?

This exact-match kit provides the 2Rx8 rank structure and 1.1 V specification the H14DSG-OD expects, allowing full population at DDR5 5600 without down-clocking or compatibility issues.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.