Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules in a row, black chips no heat spreaders

NEMIX RAM

NEMIX RAM 192GB (6 x 32GB) DDR5 5600 ECC Registered RDIMM CL46 1.1V Supermicro H14DSG-OD memory upgrade

SKU CH-9B6B-2YT4C

Six 32 GB DDR5-5600 registered ECC RDIMMs at 1.1 V CL46 deliver 192 GB for Supermicro H14DSG-OD servers

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 6X32GB

Näytä 30 muuta kokoonpanoa
  • 192 GB total capacity across six 32 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD memory slots directly

192GB DDR5 ECC RDIMM kit for Supermicro H14DSG-OD

This 192GB kit contains six 32GB DDR5 5600 Registered ECC modules built to the exact rank, voltage and timing the Supermicro H14DSG-OD memory controller expects. It is intended for administrators upgrading that specific motherboard to its full supported capacity with matched modules.

Installation notes and common issues

The 288-pin RDIMM form factor fits only the DIMM slots on this board; UDIMM or SODIMM modules will not seat. Populate all six slots following the motherboard manual’s population order so the registered buffer can offload the controller correctly. A mismatch in rank, voltage or CAS latency will prevent the system from posting at the rated 5600 speed.

The deciding specification

The kit runs at DDR5 5600 (PC5-44800) with CL46 latency at 1.1V in a 2Rx8 registered ECC configuration. If your board requires a different speed, voltage, rank structure or unbuffered modules, this kit will not be recognised at full capacity or rated performance.

Kohokohdat

  • 192 GB total capacity across six 32 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated channels
  • 10 V operation matches the motherboard's memory controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD memory slots directly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How can I confirm the kit is running at the rated DDR5 5600 speed and CL46 timings after installation?

Enter the BIOS or UEFI and verify the memory frequency reads 5600 MT/s with CAS latency 46; the registered ECC design ensures all six slots operate at full rated speed when populated per the motherboard manual.

What exactly ships in the box and are any extra components required for the Supermicro H14DSG-OD?

The package contains six 32 GB DDR5 288-pin RDIMM modules for a total of 192 GB; no additional parts are needed because the kit matches the board's registered ECC requirements and 1.1 V voltage.

Why choose the 192 GB 6 x 32 GB kit instead of a different capacity for this motherboard?

This exact-match kit provides the 2Rx8 rank structure and 1.1 V specification the H14DSG-OD expects, allowing full population at DDR5 5600 without down-clocking or compatibility issues.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.