Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR4 2933 ECC RDIMM 2Rx8 1.2V

SKU CH-E20C-C4H1W

A 192 GB DDR4 server memory kit of six 32 GB registered ECC modules running at 2933 MHz with CL21 latency and 1.2 V operation

  • Capacity192GB (6 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 192 GB capacity across six 32 GB modules for large server workloads
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation maximises density per DIMM
  • 2 V operation reduces power draw in dense configurations

Server memory kit for registered DDR4 systems

This NEMIX RAM kit provides 192 GB of DDR4 memory across six 32 GB modules. It is built for servers that require registered ECC RDIMMs running at 2933 MT/s. Desktop or workstation boards that accept only unbuffered DIMMs cannot use this kit.

Registered DDR4 2933 with ECC limits

The modules operate at PC4-23400 speed with CAS latency 21 and 1.2 V. Registered buffering adds a clock cycle, so the memory controller must support RDIMMs. ECC corrects single-bit errors but the platform must enable the feature in firmware for it to function.

288-pin RDIMM build with major OEM chips

Each stick uses 2Rx8 organisation and chips sourced from Samsung, Micron or Hynix. The 288-pin form factor fits standard DDR4 RDIMM slots. Registered design increases electrical load on the memory bus, so population rules for the target server should be checked before installation.

Přednosti

  • 192 GB capacity across six 32 GB modules for large server workloads
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation maximises density per DIMM
  • 2 V operation reduces power draw in dense configurations

Specifikace

BrandNEMIX RAM
ModelPart#: MR23400-328K6-SM-SYS-5019P-M
Part NumberPart#: MR23400-328K6-SM-SYS-5019P-M
Capacity192GB (6 x 32GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Otázky k tomuto produktu

Should I choose the 6 x 32 GB kit or a smaller capacity?

The kit provides 192 GB total across six 32 GB modules, so choose it when the server board has six slots and needs the full capacity; otherwise a smaller kit leaves room for future expansion.

What does the 2933 MHz speed mean once installed?

The modules run at DDR4 2933 (PC4-23400) with CAS latency 21, delivering that data rate when the platform supports it; actual throughput depends on the CPU memory controller and BIOS settings.

Does the 288-pin RDIMM interface limit anything in practice?

The 288-pin registered ECC RDIMM form factor fits DDR4 server slots only; it will not work in desktop or laptop boards, and the registered buffer adds one cycle of latency versus unbuffered DIMMs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.