Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.

Artículos guardados Iniciar sesión
Six green DDR4 server memory sticks, black chips, gold contacts

NEMIX RAM

NEMIX RAM 192GB (6x32GB) DDR4 2933 ECC RDIMM 2Rx8 1.2V

SKU CH-E20C-C4H1W

A 192 GB DDR4 server memory kit of six 32 GB registered ECC modules running at 2933 MHz with CL21 latency and 1.2 V operation

  • Capacity192GB (6 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 192 GB capacity across six 32 GB modules for large server workloads
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation maximises density per DIMM
  • 2 V operation reduces power draw in dense configurations

Server memory kit for registered DDR4 systems

This NEMIX RAM kit provides 192 GB of DDR4 memory across six 32 GB modules. It is built for servers that require registered ECC RDIMMs running at 2933 MT/s. Desktop or workstation boards that accept only unbuffered DIMMs cannot use this kit.

Registered DDR4 2933 with ECC limits

The modules operate at PC4-23400 speed with CAS latency 21 and 1.2 V. Registered buffering adds a clock cycle, so the memory controller must support RDIMMs. ECC corrects single-bit errors but the platform must enable the feature in firmware for it to function.

288-pin RDIMM build with major OEM chips

Each stick uses 2Rx8 organisation and chips sourced from Samsung, Micron or Hynix. The 288-pin form factor fits standard DDR4 RDIMM slots. Registered design increases electrical load on the memory bus, so population rules for the target server should be checked before installation.

Puntos fuertes

  • 192 GB capacity across six 32 GB modules for large server workloads
  • DDR4 2933 MHz speed delivers high data throughput
  • ECC registered design detects and corrects memory errors
  • 2Rx8 dual-rank organisation maximises density per DIMM
  • 2 V operation reduces power draw in dense configurations

Especificaciones

BrandNEMIX RAM
ModelPart#: MR23400-328K6-SM-SYS-5019P-M
Part NumberPart#: MR23400-328K6-SM-SYS-5019P-M
Capacity192GB (6 x 32GB)
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Preguntas sobre este artículo

Should I choose the 6 x 32 GB kit or a smaller capacity?

The kit provides 192 GB total across six 32 GB modules, so choose it when the server board has six slots and needs the full capacity; otherwise a smaller kit leaves room for future expansion.

What does the 2933 MHz speed mean once installed?

The modules run at DDR4 2933 (PC4-23400) with CAS latency 21, delivering that data rate when the platform supports it; actual throughput depends on the CPU memory controller and BIOS settings.

Does the 288-pin RDIMM interface limit anything in practice?

The 288-pin registered ECC RDIMM form factor fits DDR4 server slots only; it will not work in desktop or laptop boards, and the registered buffer adds one cycle of latency versus unbuffered DIMMs.

También en este pasillo

Los clientes también compararon

Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.