Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz CL46 2Rx8 ECC Registered RDIMM for Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-3H85-K7VSV

32 GB DDR5 5600 MHz CL46 2Rx8 registered ECC RDIMM validated for the Supermicro X14SDW-40C-SP9F motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 32GB DDR5-5600 capacity matches server memory controller expectations
  • Registered ECC architecture offloads controller for stable full-slot operation
  • 1V CL46 timing ensures rated-speed recognition without downclocking
  • 2Rx8 288-pin RDIMM form factor fits Supermicro X14SDW-40C-SP9F precisely
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Exact-fit DDR5-5600 ECC RDIMM

This 32 GB NEMIX RAM module is a 288-pin DDR5-5600 registered DIMM with ECC and CL46 latency. It operates at 1.1 V in a 2Rx8 organisation and is validated for the Supermicro X14SDW-40C-SP9F motherboard.

Suited for single-slot capacity increases

Administrators expanding the named Supermicro platform gain immediate ECC protection and registered buffering without population guesswork. Systems requiring unbuffered UDIMMs, SODIMM form factors, or speeds beyond DDR5-5600 cannot use this module.

Handles full-slot registered loads

Each stick delivers 32 GB at the board's rated 5600 MT/s with ECC active across every rank. Headroom ends at the motherboard's maximum supported capacity per channel or when total system memory exceeds the platform's documented limit.

Přednosti

  • 32GB DDR5-5600 capacity matches server memory controller expectations
  • Registered ECC architecture offloads controller for stable full-slot operation
  • 1V CL46 timing ensures rated-speed recognition without downclocking
  • 2Rx8 288-pin RDIMM form factor fits Supermicro X14SDW-40C-SP9F precisely
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

My Supermicro X14SDW-40C-SP9F board has a registered DIMM requirement — does this kit meet it?

Yes, this is a 288-pin Registered RDIMM with ECC, the exact form factor and buffering the X14SDW-40C-SP9F memory controller expects.

I plan to keep existing DDR5 4800 modules in the other channels — will the 5600 speed and CL46 timing cause issues?

The board will run all populated slots at the lowest common speed and highest latency; mixing 4800 and 5600 modules means the 5600 kit will downclock to 4800 automatically.

After installation, how do I confirm the 32 GB module is running at DDR5 5600 with ECC active?

Check the BIOS memory information or run dmidecode / lshw on Linux; both will report 5600 MT/s, 2Rx8 organisation and ECC enabled when the module is recognised correctly.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.