暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR5 RDIMM module with black memory chips, no heat spreader, 288 gold pins along the bottom edge

NEMIX RAM

NEMIX RAM 32GB DDR5 5600MHz CL46 2Rx8 ECC Registered RDIMM for Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-3H85-K7VSV

32 GB DDR5 5600 MHz CL46 2Rx8 registered ECC RDIMM validated for the Supermicro X14SDW-40C-SP9F motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB

  • 32GB DDR5-5600 capacity matches server memory controller expectations
  • Registered ECC architecture offloads controller for stable full-slot operation
  • 1V CL46 timing ensures rated-speed recognition without downclocking
  • 2Rx8 288-pin RDIMM form factor fits Supermicro X14SDW-40C-SP9F precisely
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Exact-fit DDR5-5600 ECC RDIMM

This 32 GB NEMIX RAM module is a 288-pin DDR5-5600 registered DIMM with ECC and CL46 latency. It operates at 1.1 V in a 2Rx8 organisation and is validated for the Supermicro X14SDW-40C-SP9F motherboard.

Suited for single-slot capacity increases

Administrators expanding the named Supermicro platform gain immediate ECC protection and registered buffering without population guesswork. Systems requiring unbuffered UDIMMs, SODIMM form factors, or speeds beyond DDR5-5600 cannot use this module.

Handles full-slot registered loads

Each stick delivers 32 GB at the board's rated 5600 MT/s with ECC active across every rank. Headroom ends at the motherboard's maximum supported capacity per channel or when total system memory exceeds the platform's documented limit.

特長

  • 32GB DDR5-5600 capacity matches server memory controller expectations
  • Registered ECC architecture offloads controller for stable full-slot operation
  • 1V CL46 timing ensures rated-speed recognition without downclocking
  • 2Rx8 288-pin RDIMM form factor fits Supermicro X14SDW-40C-SP9F precisely
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

My Supermicro X14SDW-40C-SP9F board has a registered DIMM requirement — does this kit meet it?

Yes, this is a 288-pin Registered RDIMM with ECC, the exact form factor and buffering the X14SDW-40C-SP9F memory controller expects.

I plan to keep existing DDR5 4800 modules in the other channels — will the 5600 speed and CL46 timing cause issues?

The board will run all populated slots at the lowest common speed and highest latency; mixing 4800 and 5600 modules means the 5600 kit will downclock to 4800 automatically.

After installation, how do I confirm the 32 GB module is running at DDR5 5600 with ECC active?

Check the BIOS memory information or run dmidecode / lshw on Linux; both will report 5600 MT/s, 2Rx8 organisation and ECC enabled when the module is recognised correctly.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。