Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 2933 CL21 2Rx8 UDIMM memory upgrade

SKU CH-MWCM-YA128

A 64 GB DDR4 2933 kit (2 × 32 GB, CL21, 1.20 V, 288-pin UDIMM) validated for Supermicro workstations

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB kit expands workstation memory capacity for heavy workloads
  • Dual 32 GB modules populate two slots for balanced channel performance
  • DDR4 2933 speed matches Supermicro platform specifications
  • CL21 latency at 1.2 V delivers stable operation under load
  • 2Rx8 288-pin UDIMM design ensures direct motherboard compatibility

System-specific DDR4 kit

This 64 GB kit contains two 32 GB DDR4 UDIMMs rated at 2933 MT/s with CL21 latency. It is built for Supermicro workstations such as the SuperWorkstation 5039AD-I and the C9X299-PGF motherboard, delivering a straightforward capacity upgrade for supported platforms.

DDR4 2933 interface limits

The modules run at the standard 1.20 V and use the 288-pin DDR4 UDIMM form factor, so they only fit boards wired for DDR4. Speed is fixed at PC4-23400 with 2Rx8 organisation, and the lack of ECC or registered buffers means they cannot be used in systems that require error-correcting or registered memory.

Unbuffered modules without spreaders

Each stick is an unbuffered UDIMM without a heat spreader, keeping the profile low for tight server or workstation chassis. The 288-pin edge connector aligns with standard DDR4 slots, and the kit is validated for the listed Supermicro models to ensure stable operation in those configurations.

Přednosti

  • 64 GB kit expands workstation memory capacity for heavy workloads
  • Dual 32 GB modules populate two slots for balanced channel performance
  • DDR4 2933 speed matches Supermicro platform specifications
  • CL21 latency at 1.2 V delivers stable operation under load
  • 2Rx8 288-pin UDIMM design ensures direct motherboard compatibility

Specifikace

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN NON-ECC Unbuffered UDIMM KIT

Otázky k tomuto produktu

Should I choose the 64GB kit or look for a single 32GB module for my SuperMicro system?

The kit provides two matched 32GB modules for dual-channel operation; a single module would run in single-channel mode and reduce memory bandwidth.

What does the 2933 MT/s rating mean once the modules are installed in my SuperMicro workstation?

The memory will run at up to 2933 MT/s if the CPU and motherboard support that speed; otherwise it will downclock to the highest speed the platform allows.

Is the 288-pin DDR4 UDIMM interface compatible with standard desktop motherboards or only SuperMicro server boards?

The 288-pin DDR4 UDIMM form factor fits any desktop or workstation board with DDR4 UDIMM slots, but this kit is validated for the listed SuperMicro systems.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.