SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 US$
0.00498037BTC
Skladem
NEMIX RAM
NEMIX RAM 8GB DDR3 1333MHz SODIMM POSIFLEX PS-3415 memory upgrade
8GB DDR3 1333MHz SODIMM module upgrades POSIFLEX PS-3415 terminals with CL9 timing and 1.35V operation
- Capacity8GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- 8GB capacity expands POS terminal multitasking headroom
- DDR3 1333MHz speed matches system memory bus
- 35V low-voltage operation reduces power draw
- 204-pin SODIMM form factor fits PS-3415 slot
- Major OEM chips deliver tested reliability
NEMIX RAM 8 GB DDR3 SODIMM for POSIFLEX PS-3415
This 8 GB DDR3 SODIMM runs at 1333 MHz with CL9 latency and 1.50 V operation. The 204-pin module uses a 2Rx8 organisation and carries no ECC or heat spreader. It is built specifically for the POSIFLEX PS-3415 fanless touch-screen POS terminal.
Suits technicians upgrading a single PS-3415 slot
The part targets maintainers of the named POS terminal who need a direct 8 GB replacement. Buyers needing ECC error correction, registered buffering, or capacities beyond 8 GB should look elsewhere. Systems requiring a different pin count, voltage, or form factor cannot use this module.
204-pin DDR3 SODIMM interface decides fit
The module plugs into a 204-pin DDR3 SO-DIMM socket keyed for 1.50 V unbuffered memory. If the target board uses a different pin layout, voltage, or DDR generation the upgrade will not seat or function. Verify the socket type before purchase.
Přednosti
- 8GB capacity expands POS terminal multitasking headroom
- DDR3 1333MHz speed matches system memory bus
- 35V low-voltage operation reduces power draw
- 204-pin SODIMM form factor fits PS-3415 slot
- Major OEM chips deliver tested reliability
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Otázky k tomuto produktu
Does the POSIFLEX PS-3415 need a free 204-pin SODIMM slot to accept this 8 GB module?
Yes, the module is a 204-pin DDR3 SODIMM and requires an empty SODIMM slot in the POSIFLEX PS-3415.
Will this PC3-10600 CL9 stick run stably if the terminal already has original 1333 MHz memory installed?
The module is rated DDR3 1333 PC3-10600 CL9, matching the terminal's supported speed, so it will operate at that frequency alongside existing 1333 MHz memory.
How can I confirm the upgrade is recognised at the correct 8 GB capacity after installation?
Boot the POSIFLEX PS-3415 and check the BIOS or operating system memory report; it should show the full 8 GB capacity for the installed module.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
SAMSUNG
SAMSUNG M393A1K43DB2-CWE DDR4-3200 8GB ECC Registered server RAM
74,99 US$
0.00095277BTC
Skladem