We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz SODIMM POSIFLEX PS-3415 memory upgrade

SKU CH-BBJ8-2HEX3

8GB DDR3 1333MHz SODIMM module upgrades POSIFLEX PS-3415 terminals with CL9 timing and 1.35V operation

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches system memory bus
  • 35V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits PS-3415 slot
  • Major OEM chips deliver tested reliability

NEMIX RAM 8 GB DDR3 SODIMM for POSIFLEX PS-3415

This 8 GB DDR3 SODIMM runs at 1333 MHz with CL9 latency and 1.50 V operation. The 204-pin module uses a 2Rx8 organisation and carries no ECC or heat spreader. It is built specifically for the POSIFLEX PS-3415 fanless touch-screen POS terminal.

Suits technicians upgrading a single PS-3415 slot

The part targets maintainers of the named POS terminal who need a direct 8 GB replacement. Buyers needing ECC error correction, registered buffering, or capacities beyond 8 GB should look elsewhere. Systems requiring a different pin count, voltage, or form factor cannot use this module.

204-pin DDR3 SODIMM interface decides fit

The module plugs into a 204-pin DDR3 SO-DIMM socket keyed for 1.50 V unbuffered memory. If the target board uses a different pin layout, voltage, or DDR generation the upgrade will not seat or function. Verify the socket type before purchase.

Highlights

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches system memory bus
  • 35V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits PS-3415 slot
  • Major OEM chips deliver tested reliability

Specifications

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions about this item

Does the POSIFLEX PS-3415 need a free 204-pin SODIMM slot to accept this 8 GB module?

Yes, the module is a 204-pin DDR3 SODIMM and requires an empty SODIMM slot in the POSIFLEX PS-3415.

Will this PC3-10600 CL9 stick run stably if the terminal already has original 1333 MHz memory installed?

The module is rated DDR3 1333 PC3-10600 CL9, matching the terminal's supported speed, so it will operate at that frequency alongside existing 1333 MHz memory.

How can I confirm the upgrade is recognised at the correct 8 GB capacity after installation?

Boot the POSIFLEX PS-3415 and check the BIOS or operating system memory report; it should show the full 8 GB capacity for the installed module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.