Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Green 204-pin DDR3 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz SODIMM POSIFLEX PS-3415 memory upgrade

SKU CH-BBJ8-2HEX3

8GB DDR3 1333MHz SODIMM module upgrades POSIFLEX PS-3415 terminals with CL9 timing and 1.35V operation

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches system memory bus
  • 35V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits PS-3415 slot
  • Major OEM chips deliver tested reliability

NEMIX RAM 8 GB DDR3 SODIMM for POSIFLEX PS-3415

This 8 GB DDR3 SODIMM runs at 1333 MHz with CL9 latency and 1.50 V operation. The 204-pin module uses a 2Rx8 organisation and carries no ECC or heat spreader. It is built specifically for the POSIFLEX PS-3415 fanless touch-screen POS terminal.

Suits technicians upgrading a single PS-3415 slot

The part targets maintainers of the named POS terminal who need a direct 8 GB replacement. Buyers needing ECC error correction, registered buffering, or capacities beyond 8 GB should look elsewhere. Systems requiring a different pin count, voltage, or form factor cannot use this module.

204-pin DDR3 SODIMM interface decides fit

The module plugs into a 204-pin DDR3 SO-DIMM socket keyed for 1.50 V unbuffered memory. If the target board uses a different pin layout, voltage, or DDR generation the upgrade will not seat or function. Verify the socket type before purchase.

Points forts

  • 8GB capacity expands POS terminal multitasking headroom
  • DDR3 1333MHz speed matches system memory bus
  • 35V low-voltage operation reduces power draw
  • 204-pin SODIMM form factor fits PS-3415 slot
  • Major OEM chips deliver tested reliability

Caractéristiques

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Questions sur cet article

Does the POSIFLEX PS-3415 need a free 204-pin SODIMM slot to accept this 8 GB module?

Yes, the module is a 204-pin DDR3 SODIMM and requires an empty SODIMM slot in the POSIFLEX PS-3415.

Will this PC3-10600 CL9 stick run stably if the terminal already has original 1333 MHz memory installed?

The module is rated DDR3 1333 PC3-10600 CL9, matching the terminal's supported speed, so it will operate at that frequency alongside existing 1333 MHz memory.

How can I confirm the upgrade is recognised at the correct 8 GB capacity after installation?

Boot the POSIFLEX PS-3415 and check the BIOS or operating system memory report; it should show the full 8 GB capacity for the installed module.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.