Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 96GB (2×48GB) DDR5-5600 CL46 ECC RDIMM Supermicro H14DST-F

SKU CH-CB97-8E348

Registered ECC DDR5 kit delivers 96 GB across two 48 GB modules at 5600 MHz CL46 for Supermicro H14DST-F servers

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity from two 48 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput on supported platforms
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 1 V operation matches the platform's voltage requirement for stable operation
  • Verified fitment for Supermicro H14DST-F with 288-pin RDIMM form factor

Exact-match upgrade for Supermicro H14DST-F

This 96GB kit contains two 48GB DDR5-5600 Registered ECC RDIMMs built to the board's exact specifications. The 2Rx8 rank structure, 1.1V operation and CL46 timing match the memory controller's expectations so the full capacity is recognised at rated speed.

Registered ECC advantage over unbuffered memory

Registered architecture buffers address and command signals, letting every slot run fully populated without overloading the controller. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots that unbuffered non-ECC modules cannot stop.

DDR5-5600 bandwidth ceiling

The PC5-44800 interface delivers 5600 MT/s, which caps throughput at the module's rated speed even when all channels are filled. Systems needing higher memory bandwidth or lower latency than this standard provides must move to a platform that supports faster DDR5 data rates.

Přednosti

  • 96 GB capacity from two 48 GB modules for high-density server workloads
  • DDR5-5600 speed with CL46 latency delivers rated throughput on supported platforms
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 1 V operation matches the platform's voltage requirement for stable operation
  • Verified fitment for Supermicro H14DST-F with 288-pin RDIMM form factor

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What slot type and pin count does this kit require on the Supermicro H14DST-F motherboard?

It uses 288-pin DDR5 RDIMM slots, which are the registered DIMM form factor the board expects.

Which DIMM population order should I follow when installing both 48 GB modules?

Check the H14DST-F manual for the approved slot sequence; installing in the wrong order can prevent the system from recognising the full 96 GB capacity.

Do these modules have a heat spreader that could block adjacent slots or airflow?

No heat spreader is fitted, so the low-profile bare modules fit tightly spaced slots without clearance issues.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.