Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 1.1V ECC Registered RDIMM Supermicro H14SSL-N memory upgrade

SKU CH-CCK6-TKCP1

96 GB DDR5 registered ECC RDIMM at 5600 MT/s, CL46, 1.1 V, 2Rx4, validated for Supermicro H14SSL-N motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity lets the Supermicro H14SSL-N run memory-intensive workloads
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • 2Rx4 registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation meets the platform's voltage spec for stable full-population use
  • 288-pin RDIMM form factor is the exact module type the H14SSL-N requires

96 GB DDR5 Registered ECC RDIMM

This 96 GB DDR5 5600 CL46 2Rx4 1.1 V ECC Registered RDIMM is built for the Supermicro H14SSL-N motherboard. It uses a 288-pin Registered form factor with on-die error correction. The module arrives new and ready for server deployment.

Registered 2Rx4 at 1.1 V for full-slot population

The registered architecture and 2Rx4 organisation let the memory controller drive every slot at the rated 5600 MT/s without signal degradation. ECC corrects single-bit errors on the fly. Voltage is fixed at 1.10 V to match the platform specification.

Suited for Supermicro H14SSL-N memory upgrades

This kit fits administrators expanding or repairing that specific board. It is not for systems that require UDIMM or SODIMM modules, nor for platforms that do not support registered ECC DDR5 at 5600 MT/s.

Přednosti

  • 96 GB capacity lets the Supermicro H14SSL-N run memory-intensive workloads
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • 2Rx4 registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation meets the platform's voltage spec for stable full-population use
  • 288-pin RDIMM form factor is the exact module type the H14SSL-N requires

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 5600 speed actually run at 5600 MT/s in my Supermicro H14SSL-N?

The modules are spec-matched to the board's memory controller with the exact rank, voltage, and timing it expects, so they are recognized at full capacity and run at the rated 5600 MT/s when installed per the motherboard's population rules.

What does the 288-pin RDIMM form factor mean for installation?

This is a 288-pin Registered DIMM, not a UDIMM or SODIMM, and it matches the physical slot and electrical requirements of the Supermicro H14SSL-N motherboard for direct installation.

How much space does the module need inside the chassis?

The module has no heat spreader, keeping it at standard RDIMM height so it fits in typical server DIMM slots without clearance issues.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.