暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular DDR5 RDIMM module with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 1.1V ECC Registered RDIMM Supermicro H14SSL-N memory upgrade

SKU CH-CCK6-TKCP1

96 GB DDR5 registered ECC RDIMM at 5600 MT/s, CL46, 1.1 V, 2Rx4, validated for Supermicro H14SSL-N motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

他に 24点の構成を表示
  • 96 GB capacity lets the Supermicro H14SSL-N run memory-intensive workloads
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • 2Rx4 registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation meets the platform's voltage spec for stable full-population use
  • 288-pin RDIMM form factor is the exact module type the H14SSL-N requires

96 GB DDR5 Registered ECC RDIMM

This 96 GB DDR5 5600 CL46 2Rx4 1.1 V ECC Registered RDIMM is built for the Supermicro H14SSL-N motherboard. It uses a 288-pin Registered form factor with on-die error correction. The module arrives new and ready for server deployment.

Registered 2Rx4 at 1.1 V for full-slot population

The registered architecture and 2Rx4 organisation let the memory controller drive every slot at the rated 5600 MT/s without signal degradation. ECC corrects single-bit errors on the fly. Voltage is fixed at 1.10 V to match the platform specification.

Suited for Supermicro H14SSL-N memory upgrades

This kit fits administrators expanding or repairing that specific board. It is not for systems that require UDIMM or SODIMM modules, nor for platforms that do not support registered ECC DDR5 at 5600 MT/s.

特長

  • 96 GB capacity lets the Supermicro H14SSL-N run memory-intensive workloads
  • DDR5 5600 speed with CL46 latency matches the board's rated timing
  • 2Rx4 registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation meets the platform's voltage spec for stable full-population use
  • 288-pin RDIMM form factor is the exact module type the H14SSL-N requires

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will the 5600 speed actually run at 5600 MT/s in my Supermicro H14SSL-N?

The modules are spec-matched to the board's memory controller with the exact rank, voltage, and timing it expects, so they are recognized at full capacity and run at the rated 5600 MT/s when installed per the motherboard's population rules.

What does the 288-pin RDIMM form factor mean for installation?

This is a 288-pin Registered DIMM, not a UDIMM or SODIMM, and it matches the physical slot and electrical requirements of the Supermicro H14SSL-N motherboard for direct installation.

How much space does the module need inside the chassis?

The module has no heat spreader, keeping it at standard RDIMM height so it fits in typical server DIMM slots without clearance issues.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。