暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM MR44800-9624K1 96GB DDR5 5600MHz CL46 ECC RDIMM memory upgrade

SKU CH-6RKJ-KP0EW

96 GB DDR5 server memory kit running at 5600 MHz with CL46 latency, registered ECC and 1.1 V operation for GIGABYTE MZ33-AR1 motherboards

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity lets you fully populate the server for memory-intensive workloads
  • DDR5 5600 MHz speed delivers high bandwidth for demanding applications
  • CL46 latency with 1.1 V operation balances performance and power efficiency
  • Registered ECC architecture corrects single-bit errors and stabilises fully loaded configurations
  • 288-pin RDIMM form factor matches the GIGABYTE MZ33-AR1 motherboard slot requirements

Exact-match server upgrade

This 96GB DDR5 kit is built for the GIGABYTE MZ33-AR1 motherboard and delivers the precise rank, voltage and timing the memory controller expects. It installs as a registered ECC RDIMM so the board recognises the full capacity at rated speed without manual tuning.

Capacity and headroom

The 96GB total across the kit handles large virtualisation clusters, in-memory databases and heavy container workloads with room to spare. Registered buffering keeps every slot stable when fully populated, while ECC corrects single-bit errors before they affect production data. The CL46 latency and 1.10V operation set the practical ceiling for this platform's memory subsystem.

Upgrade path

It replaces lower-capacity DDR5 RDIMMs or fills empty slots on the MZ33-AR1 when the project outgrows the current configuration. The jump is worth it when workloads exceed the existing memory ceiling and the board's population rules allow the 2Rx4 registered modules. Buyers needing unbuffered UDIMMs or SODIMM form factors cannot use this kit.

特長

  • 96 GB capacity lets you fully populate the server for memory-intensive workloads
  • DDR5 5600 MHz speed delivers high bandwidth for demanding applications
  • CL46 latency with 1.1 V operation balances performance and power efficiency
  • Registered ECC architecture corrects single-bit errors and stabilises fully loaded configurations
  • 288-pin RDIMM form factor matches the GIGABYTE MZ33-AR1 motherboard slot requirements

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Can I mix these 96GB 2Rx4 DDR5 5600 CL46 RDIMMs with other DDR5 modules of different rank or speed in the GIGABYTE MZ33-AR1?

The MZ33-AR1 requires matched DDR5 5600 registered ECC DIMMs. Mixing ranks, speeds, or voltages can prevent the memory controller from training at 5600MHz and may disable ECC. Install identical modules per the motherboard manual.

How do I confirm the kit is running at DDR5 5600MHz with ECC active after installation?

Enter BIOS and verify the memory frequency shows 5600MHz (PC5-44800) and ECC is reported as enabled. The OS should also display 96GB total capacity with ECC status active.

Does the MR44800-9624K1 box include any cables, brackets, or thermal pads, or just the memory modules?

The package contains only the 96GB DDR5 5600MHz 2Rx4 1.1V CL46 288-pin ECC RDIMM kit. No cables, brackets, or thermal pads are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。