Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-EP2V-7GN21

96 GB DDR5 5600 CL46 2Rx4 ECC registered RDIMM built for the Supermicro H14DSG-OM motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB

Zobrazit dalších 30 konfigurací
  • 96 GB DDR5 5600 registered ECC module delivers full-capacity performance at rated speed
  • 2Rx4 registered architecture with ECC corrects single-bit errors on the fly for enterprise stability
  • 1 V CL46 timing matches the memory controller spec so the system recognises the module immediately
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM motherboard slot exactly
  • Lifetime replacement warranty and free US-based technical support back the upgrade long term

Compatible Server Memory Upgrade

This 96GB DDR5 module is built as an exact-match upgrade for the Supermicro H14DSG-OM motherboard. It uses the 288-pin RDIMM form factor that the board requires and is verified for the platform's population rules. The registered ECC design supports full-capacity operation across every slot. System administrators can install it with confidence that the memory controller will recognise the full capacity at rated speed.

Registered ECC with 2Rx4 Organisation

The module runs at DDR5-5600 (PC5-44800) with CL46 latency at 1.1V. Its 2Rx4 rank structure and registered architecture offload the memory controller to maintain stability when all slots are populated. ECC functionality catches and corrects single-bit errors on the fly to prevent silent data corruption. Major OEM chips from Samsung, Micron or Hynix provide enterprise-grade reliability without a heat spreader.

Suited for H14DSG-OM Population

This kit suits administrators upgrading a Supermicro H14DSG-OM system that specifically calls for 288-pin registered DDR5 DIMMs with 2Rx4 organisation. Builders needing UDIMM or SODIMM form factors cannot use this module. Buyers whose motherboards require different rank configurations, voltage levels or DDR generations should consult their manual before ordering.

Přednosti

  • 96 GB DDR5 5600 registered ECC module delivers full-capacity performance at rated speed
  • 2Rx4 registered architecture with ECC corrects single-bit errors on the fly for enterprise stability
  • 1 V CL46 timing matches the memory controller spec so the system recognises the module immediately
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM motherboard slot exactly
  • Lifetime replacement warranty and free US-based technical support back the upgrade long term

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 5600 MHz rating actually run at that speed in my Supermicro H14DSG-OM?

Yes — the module is spec-matched to the board's memory controller, so it initialises at DDR5-5600 with CL46 timings and 1.1 V without manual tuning.

What does the 288-pin RDIMM interface mean for installation?

It fits only 288-pin DDR5 RDIMM slots; the registered buffer and ECC require a server-class motherboard like the H14DSG-OM and will not work in UDIMM or SODIMM sockets.

How much clearance does the module need above the DIMM slot?

The kit has no heat spreader, so it uses the standard low-profile RDIMM height and fits in typical 1U server chassis without extra vertical clearance.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.