我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 96GB DDR5 5600 CL46 2Rx4 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-EP2V-7GN21

96 GB DDR5 5600 CL46 2Rx4 ECC registered RDIMM built for the Supermicro H14DSG-OM motherboard

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB DDR5 5600 registered ECC module delivers full-capacity performance at rated speed
  • 2Rx4 registered architecture with ECC corrects single-bit errors on the fly for enterprise stability
  • 1 V CL46 timing matches the memory controller spec so the system recognises the module immediately
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM motherboard slot exactly
  • Lifetime replacement warranty and free US-based technical support back the upgrade long term

Compatible Server Memory Upgrade

This 96GB DDR5 module is built as an exact-match upgrade for the Supermicro H14DSG-OM motherboard. It uses the 288-pin RDIMM form factor that the board requires and is verified for the platform's population rules. The registered ECC design supports full-capacity operation across every slot. System administrators can install it with confidence that the memory controller will recognise the full capacity at rated speed.

Registered ECC with 2Rx4 Organisation

The module runs at DDR5-5600 (PC5-44800) with CL46 latency at 1.1V. Its 2Rx4 rank structure and registered architecture offload the memory controller to maintain stability when all slots are populated. ECC functionality catches and corrects single-bit errors on the fly to prevent silent data corruption. Major OEM chips from Samsung, Micron or Hynix provide enterprise-grade reliability without a heat spreader.

Suited for H14DSG-OM Population

This kit suits administrators upgrading a Supermicro H14DSG-OM system that specifically calls for 288-pin registered DDR5 DIMMs with 2Rx4 organisation. Builders needing UDIMM or SODIMM form factors cannot use this module. Buyers whose motherboards require different rank configurations, voltage levels or DDR generations should consult their manual before ordering.

商品特色

  • 96 GB DDR5 5600 registered ECC module delivers full-capacity performance at rated speed
  • 2Rx4 registered architecture with ECC corrects single-bit errors on the fly for enterprise stability
  • 1 V CL46 timing matches the memory controller spec so the system recognises the module immediately
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM motherboard slot exactly
  • Lifetime replacement warranty and free US-based technical support back the upgrade long term

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 5600 MHz rating actually run at that speed in my Supermicro H14DSG-OM?

Yes — the module is spec-matched to the board's memory controller, so it initialises at DDR5-5600 with CL46 timings and 1.1 V without manual tuning.

What does the 288-pin RDIMM interface mean for installation?

It fits only 288-pin DDR5 RDIMM slots; the registered buffer and ECC require a server-class motherboard like the H14DSG-OM and will not work in UDIMM or SODIMM sockets.

How much clearance does the module need above the DIMM slot?

The kit has no heat spreader, so it uses the standard low-profile RDIMM height and fits in typical 1U server chassis without extra vertical clearance.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。