NEMIX RAM
NEMIX RAM DDR5 6400 ECC RDIMM 1TB (8×128GB) CL52 1.1V 2Rx4 Supermicro H14DST-F memory upgrade
A 1 TB DDR5 registered ECC server memory kit of eight 128 GB modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14DST-F motherboard
- Capacity1TB (8 x 128GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB capacity across eight 128GB modules for maximum server density
- DDR5-6400 speed with CL52 latency delivers rated throughput
- Registered ECC design corrects single-bit errors for data integrity
- 1V operation matches platform voltage requirements exactly
- 288-pin RDIMM form factor verified for Supermicro H14DST-F
Exact-match DDR5-6400 kit for Supermicro H14DST-F
This 1 TB kit contains eight 128 GB DDR5 ECC RDIMMs rated at 6400 MT/s with CL52 timings and 1.1 V operation. It is built for the Supermicro H14DST-F motherboard and targets administrators who need maximum registered ECC capacity in every slot.
Installation notes and common pitfalls
The modules use the 288-pin RDIMM form factor required by the board; they are not compatible with UDIMM or SODIMM slots. Because the kit is fully populated, the memory controller must support the 2Rx4 rank configuration at the rated speed, otherwise the system may fall back to a lower data rate or fail to post.
Pre-purchase checks for your server
Verify the motherboard manual for approved DIMM population order, maximum supported capacity per channel, and any BIOS version requirements for 1 TB configurations. Confirm that your CPU and platform firmware recognise the 2Rx4 registered ECC modules at 6400 MT/s before ordering.
Přednosti
- 1TB capacity across eight 128GB modules for maximum server density
- DDR5-6400 speed with CL52 latency delivers rated throughput
- Registered ECC design corrects single-bit errors for data integrity
- 1V operation matches platform voltage requirements exactly
- 288-pin RDIMM form factor verified for Supermicro H14DST-F
Specifikace
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K8 |
| Capacity | 1TB (8 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
How do I confirm the 1TB kit is running at DDR5 6400 CL52 after installation?
Enter the BIOS and verify the memory speed reads 6400 MT/s, CAS latency shows CL52, and all 8 modules report 128 GB each at 1.10 V with ECC active.
What ships in the box and what must I source separately?
The kit includes eight 128 GB DDR5 6400 2Rx4 ECC RDIMM modules; no heat spreaders or extra cables are supplied, and the Supermicro H14DST-F motherboard is not included.
Which capacity option matches the Supermicro H14DST-F population rules for a full 1 TB?
The 8 × 128 GB kit is the exact-match 1 TB configuration validated for the H14DST-F, using 2Rx4 registered ECC at 1.1 V to satisfy the board's slot-population requirements.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.



