Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 1TB (8×128GB) CL52 1.1V 2Rx4 Supermicro H14DST-F memory upgrade

SKU CH-7J0R-SXR37

A 1 TB DDR5 registered ECC server memory kit of eight 128 GB modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14DST-F motherboard

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 1TB capacity across eight 128GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency delivers rated throughput
  • Registered ECC design corrects single-bit errors for data integrity
  • 1V operation matches platform voltage requirements exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F

Exact-match DDR5-6400 kit for Supermicro H14DST-F

This 1 TB kit contains eight 128 GB DDR5 ECC RDIMMs rated at 6400 MT/s with CL52 timings and 1.1 V operation. It is built for the Supermicro H14DST-F motherboard and targets administrators who need maximum registered ECC capacity in every slot.

Installation notes and common pitfalls

The modules use the 288-pin RDIMM form factor required by the board; they are not compatible with UDIMM or SODIMM slots. Because the kit is fully populated, the memory controller must support the 2Rx4 rank configuration at the rated speed, otherwise the system may fall back to a lower data rate or fail to post.

Pre-purchase checks for your server

Verify the motherboard manual for approved DIMM population order, maximum supported capacity per channel, and any BIOS version requirements for 1 TB configurations. Confirm that your CPU and platform firmware recognise the 2Rx4 registered ECC modules at 6400 MT/s before ordering.

Punti di forza

  • 1TB capacity across eight 128GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency delivers rated throughput
  • Registered ECC design corrects single-bit errors for data integrity
  • 1V operation matches platform voltage requirements exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Domande su questo articolo

How do I confirm the 1TB kit is running at DDR5 6400 CL52 after installation?

Enter the BIOS and verify the memory speed reads 6400 MT/s, CAS latency shows CL52, and all 8 modules report 128 GB each at 1.10 V with ECC active.

What ships in the box and what must I source separately?

The kit includes eight 128 GB DDR5 6400 2Rx4 ECC RDIMM modules; no heat spreaders or extra cables are supplied, and the Supermicro H14DST-F motherboard is not included.

Which capacity option matches the Supermicro H14DST-F population rules for a full 1 TB?

The 8 × 128 GB kit is the exact-match 1 TB configuration validated for the H14DST-F, using 2Rx4 registered ECC at 1.1 V to satisfy the board's slot-population requirements.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.