我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM DDR5 6400 ECC RDIMM 1TB (8×128GB) CL52 1.1V 2Rx4 Supermicro H14DST-F memory upgrade

SKU CH-7J0R-SXR37

A 1 TB DDR5 registered ECC server memory kit of eight 128 GB modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14DST-F motherboard

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 1TB capacity across eight 128GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency delivers rated throughput
  • Registered ECC design corrects single-bit errors for data integrity
  • 1V operation matches platform voltage requirements exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F

Exact-match DDR5-6400 kit for Supermicro H14DST-F

This 1 TB kit contains eight 128 GB DDR5 ECC RDIMMs rated at 6400 MT/s with CL52 timings and 1.1 V operation. It is built for the Supermicro H14DST-F motherboard and targets administrators who need maximum registered ECC capacity in every slot.

Installation notes and common pitfalls

The modules use the 288-pin RDIMM form factor required by the board; they are not compatible with UDIMM or SODIMM slots. Because the kit is fully populated, the memory controller must support the 2Rx4 rank configuration at the rated speed, otherwise the system may fall back to a lower data rate or fail to post.

Pre-purchase checks for your server

Verify the motherboard manual for approved DIMM population order, maximum supported capacity per channel, and any BIOS version requirements for 1 TB configurations. Confirm that your CPU and platform firmware recognise the 2Rx4 registered ECC modules at 6400 MT/s before ordering.

商品特色

  • 1TB capacity across eight 128GB modules for maximum server density
  • DDR5-6400 speed with CL52 latency delivers rated throughput
  • Registered ECC design corrects single-bit errors for data integrity
  • 1V operation matches platform voltage requirements exactly
  • 288-pin RDIMM form factor verified for Supermicro H14DST-F

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

How do I confirm the 1TB kit is running at DDR5 6400 CL52 after installation?

Enter the BIOS and verify the memory speed reads 6400 MT/s, CAS latency shows CL52, and all 8 modules report 128 GB each at 1.10 V with ECC active.

What ships in the box and what must I source separately?

The kit includes eight 128 GB DDR5 6400 2Rx4 ECC RDIMM modules; no heat spreaders or extra cables are supplied, and the Supermicro H14DST-F motherboard is not included.

Which capacity option matches the Supermicro H14DST-F population rules for a full 1 TB?

The 8 × 128 GB kit is the exact-match 1 TB configuration validated for the H14DST-F, using 2Rx4 registered ECC at 1.1 V to satisfy the board's slot-population requirements.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。