OEM Industries
OEM Industries MGT8012HB-A25 80mm 25mm 12V 0.24A 3-pin CPU cooler
80 mm square fan with ball bearing, 12 V 0.24 A three-pin power for server CPU cooling
- ColorBlack
- TypeFan only
- Fan Size80mm
- Bearing TypeBall
- Power Connector3 Pin
- LEDNo
- 80 mm fan fits tight server and case spaces
- 25 mm thickness balances airflow and clearance
- Ball bearing design extends operating life
- 12 V 0.24 A draw keeps power use low
- Three pin connector enables speed monitoring
Compact 80 mm server fan
The OEM Industries MGT8012HB-A25 is an 80 mm square fan built for 12 V server and workstation chassis. It draws 0.24 A through a standard three-pin connector and uses a ball bearing for continuous operation. The black frame fits tight 80 mm mounts in rack-mount or small-form-factor systems.
Replaces worn 80 mm ball-bearing units
Swap this fan in when an existing 80 mm cooler becomes noisy, vibrates or fails to spin at full speed. The 12 V 0.24 A rating matches many legacy server trays, so the upgrade is worthwhile when the original sleeve-bearing fan has seized or the airflow has dropped below specification.
Direct three-pin drop-in
Installation requires aligning the four mounting holes and pressing the three-pin plug onto the motherboard or backplane header. The only common issue is reversed polarity if the keyed connector is forced the wrong way; otherwise the fan seats flush in standard 80 mm cut-outs.
Přednosti
- 80 mm fan fits tight server and case spaces
- 25 mm thickness balances airflow and clearance
- Ball bearing design extends operating life
- 12 V 0.24 A draw keeps power use low
- Three pin connector enables speed monitoring
Specifikace
| Model | MGT8012HB-A25 |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 80mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
| LED | No |
Otázky k tomuto produktu
What mounting holes does the 80mm square frame use?
The fan uses the standard 80mm square mounting pattern with four corner holes spaced for 80mm centres.
How do I connect the 3-pin connector so speed reporting works?
Plug the 3-pin header onto a motherboard 3-pin or 4-pin fan header aligning the key; the third wire carries the tach signal for RPM monitoring.
When should I replace the ball-bearing fan?
Replace the fan when bearing noise becomes audible or RPM drops below the rated speed under 12V 0.24A load.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 US$
0.00001054BTC
Skladem