Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Small frameless graphics card cooler, brown and transparent finish, three mounting holes, three-pin power connector

OEM Industries

OEM Industries PLD10010S12M 12V 0.2A 3 Pin VGA Fan Graphics Card Cooler

SKU CH-8WSD-K7P9J

Replacement graphics card fan with a 12 V 0.2 A three-pin connector, sleeve bearing and 39 mm mounting spacing

  • Color2-Tone
  • TypeAccessories
  • Bearing TypeSleeve Bearing
  • Power Connector3 Pin
  • 12 V 0.2 A low power draw keeps card temperatures down
  • sleeve bearing runs quietly for everyday desktop use
  • 3 pin connector fits standard graphics card headers
  • 95 mm frameless design suits tight GPU clearances
  • 39 mm mounting pattern matches listed Gigabyte models

Replacement VGA Fan for Gigabyte Cards

This 12V 0.2A three-pin fan fits Gigabyte models such as the GVN550WF2, N56GOC, R667D3, R777OC, GV-N560OC-1GI, GTX560Ti and GTX660Ti. It uses a sleeve bearing and a frameless brown and transparent housing. The cooler mounts with three holes on a 39mm pitch and has a 95mm diameter.

Upgrading from a Worn Original Cooler

Replace the factory fan when bearings become noisy, airflow drops or the card throttles under load. The three-wire connector restores speed reporting so the GPU driver can regulate temperature. The jump is worth it when the original cooler still spins but no longer keeps the core within safe limits.

Check Mounting Holes and Connector Before Ordering

Verify that your card uses the three-hole 39mm pattern and a standard three-pin header. The frameless design means no screw holes on the fan frame itself; the shroud must provide the mounting points. Confirm the 95mm diameter clears adjacent components on your specific board layout.

Přednosti

  • 12 V 0.2 A low power draw keeps card temperatures down
  • sleeve bearing runs quietly for everyday desktop use
  • 3 pin connector fits standard graphics card headers
  • 95 mm frameless design suits tight GPU clearances
  • 39 mm mounting pattern matches listed Gigabyte models

Specifikace

ModelPLD10010S12M
Color2-Tone
TypeAccessories
Bearing TypeSleeve Bearing
Power Connector3 Pin

Otázky k tomuto produktu

What are the mounting hole dimensions and spacing for the PLD10010S12M cooler?

The cooler uses three mounting holes with a 39 mm spacing between each hole.

How do I connect the 3-pin power connector, and what mistake should I avoid?

Plug the 3-pin connector into the graphics card's fan header; do not force it onto a 4-pin PWM header as the keying differs.

When should I replace the sleeve bearing fan in this cooler?

Replace the fan when bearing noise becomes audible or RPM drops below the rated 0.2 A draw at 12 V.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.