Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

OEM Industries

OEM Industries SJ80025HA1 8025 110~120V AC 50/60Hz 2 Wires Ball Bearing CPU cooler

SKU CH-KHBS-TBRS6 MPN SJ80025HA1

An 80 mm ball-bearing fan with a metal frame, running on 110–120 V AC at 50/60 Hz via a two-wire lead

  • TypeFan only
  • Fan Size80mm
  • Bearing Type2 Ball
  • Power Connector2 Wires
  • LEDNo
  • 80 mm metal-frame fan fits tight CPU cooler slots
  • Dual ball bearings extend operating life over sleeve designs
  • 110–120 V AC input powers directly from mains supply
  • 50/60 Hz compatibility suits global grid frequencies
  • Two-wire lead simplifies installation without PWM complexity

OEM Industries 80 mm AC Fan

The OEM Industries SJ80025HA1 is an 80 mm frame fan that runs directly from 110–120 V AC mains at 50 or 60 Hz. It uses a two-wire lead and a metal frame, so it suits equipment that already provides line-voltage power. Builders needing a PWM or voltage-controlled DC fan should choose a different model.

Sustained Operation With Ball Bearings

Dual ball bearings give the fan a predictable wear pattern during continuous duty, avoiding the friction increase that sleeve bearings show after long runs. The metal frame keeps blade-to-housing clearance stable when the ambient temperature rises. No speed-control signal is present, so airflow stays constant from start to finish.

110–120 V AC Two-Wire Connection

The sole deciding specification is the 110–120 V AC rating with a two-wire connector; the fan cannot be powered from a standard motherboard header or a 12 V DC supply. Verify that your chassis or industrial enclosure provides exactly this mains voltage before ordering.

Přednosti

  • 80 mm metal-frame fan fits tight CPU cooler slots
  • Dual ball bearings extend operating life over sleeve designs
  • 110–120 V AC input powers directly from mains supply
  • 50/60 Hz compatibility suits global grid frequencies
  • Two-wire lead simplifies installation without PWM complexity

Specifikace

ModelSJ80025HA1
TypeFan only
Fan Size80mm
Bearing Type2 Ball
Power Connector2 Wires
LEDNo

Otázky k tomuto produktu

How much heat does the SJ80025HA1 generate when running continuously on 120 V AC?

The fan draws power directly from 110–120 V AC at 50/60 Hz with a two-wire lead, so its heat output is tied to that mains supply rather than a low-voltage rail.

What mounting hardware must I already have to install this 80 mm metal-frame fan?

You need an 80 mm mounting pattern — four screw holes spaced for 80*80*25 mm — plus access to a 110–120 V AC source; no low-voltage header or adapter is included.

Will the two-wire AC lead on this 8025 fan work alongside a modern motherboard PWM header?

No, the SJ80025HA1 uses a fixed-voltage 110–120 V AC two-wire connection and has no PWM or tach signal, so it cannot plug into a standard 4-pin CPU fan header.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.