OEM Industries
OEM Industries SJ80025HA1 8025 110~120V AC 50/60Hz 2 Wires Ball Bearing CPU cooler
An 80 mm ball-bearing fan with a metal frame, running on 110–120 V AC at 50/60 Hz via a two-wire lead
- TypeFan only
- Fan Size80mm
- Bearing Type2 Ball
- Power Connector2 Wires
- LEDNo
- 80 mm metal-frame fan fits tight CPU cooler slots
- Dual ball bearings extend operating life over sleeve designs
- 110–120 V AC input powers directly from mains supply
- 50/60 Hz compatibility suits global grid frequencies
- Two-wire lead simplifies installation without PWM complexity
OEM Industries 80 mm AC Fan
The OEM Industries SJ80025HA1 is an 80 mm frame fan that runs directly from 110–120 V AC mains at 50 or 60 Hz. It uses a two-wire lead and a metal frame, so it suits equipment that already provides line-voltage power. Builders needing a PWM or voltage-controlled DC fan should choose a different model.
Sustained Operation With Ball Bearings
Dual ball bearings give the fan a predictable wear pattern during continuous duty, avoiding the friction increase that sleeve bearings show after long runs. The metal frame keeps blade-to-housing clearance stable when the ambient temperature rises. No speed-control signal is present, so airflow stays constant from start to finish.
110–120 V AC Two-Wire Connection
The sole deciding specification is the 110–120 V AC rating with a two-wire connector; the fan cannot be powered from a standard motherboard header or a 12 V DC supply. Verify that your chassis or industrial enclosure provides exactly this mains voltage before ordering.
特長
- 80 mm metal-frame fan fits tight CPU cooler slots
- Dual ball bearings extend operating life over sleeve designs
- 110–120 V AC input powers directly from mains supply
- 50/60 Hz compatibility suits global grid frequencies
- Two-wire lead simplifies installation without PWM complexity
仕様
| Model | SJ80025HA1 |
|---|---|
| Type | Fan only |
| Fan Size | 80mm |
| Bearing Type | 2 Ball |
| Power Connector | 2 Wires |
| LED | No |
この商品に関する質問
How much heat does the SJ80025HA1 generate when running continuously on 120 V AC?
The fan draws power directly from 110–120 V AC at 50/60 Hz with a two-wire lead, so its heat output is tied to that mains supply rather than a low-voltage rail.
What mounting hardware must I already have to install this 80 mm metal-frame fan?
You need an 80 mm mounting pattern — four screw holes spaced for 80*80*25 mm — plus access to a 110–120 V AC source; no low-voltage header or adapter is included.
Will the two-wire AC lead on this 8025 fan work alongside a modern motherboard PWM header?
No, the SJ80025HA1 uses a fixed-voltage 110–120 V AC two-wire connection and has no PWM or tach signal, so it cannot plug into a standard 4-pin CPU fan header.
同じ売り場の商品
よく比較されている商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



