OWC
OWC 8GB (2x4GB) DDR3 1600 PC3-12800 CL11 ECC UDIMM memory upgrade
- 8GB (2 x 4GB)
- 240-Pin DDR3 ECC UD…
30,99 US$
0.00040264BTC
Skladem
OWC
OWC 16GB (2x8GB) DDR3L 1600 CL11 1.35V SODIMM kit for Synology DS1817+ RS818+ RS818RP+ RS1219+
16 GB DDR3L 1600 SODIMM kit (2 × 8 GB, CL11, 1.35 V) validated for Synology DS1817+, RS818+, RS818RP+ and RS1219+ NAS models
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3L Non-ECC SODIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
Capacity 16GB (2 x 8GB)
- 8GB (2 x 4GB)
- 16GB (2 x 8GB)
- 16 GB kit expands NAS capacity for heavier workloads
- DDR3L 1600 CL11 1.35 V matches Synology DS1817+ RS818+ RS818RP+ RS1219+ specs
- JEDEC and RoHS compliant for warranty-safe upgrades
- 204-pin SODIMM form factor fits the four supported NAS models
- Two 8 GB unbuffered non-ECC modules install as a matched pair
Synology NAS DDR3L kit
This 16GB kit contains two 8GB DDR3L SODIMM modules rated at 1600MHz with CL11 latency. It is built for Synology DS1817+, RS818+, RS818RP+ and RS1219+ units that accept 204-pin laptop memory. The modules run at 1.35V and are unbuffered non-ECC.
204-pin DDR3L 1.35V SODIMM
The decisive specification is the 204-pin DDR3L form factor at 1.35V. Systems requiring standard 1.5V DDR3, registered DIMMs, ECC modules or a different pin count will not accept these sticks. Verify the slot type before ordering.
NAS owners needing 16GB total
This kit suits administrators expanding a compatible Synology NAS to 16GB using matched pairs. Builders needing ECC protection, registered memory, higher capacities per slot, or a different voltage should look elsewhere.
Přednosti
- 16 GB kit expands NAS capacity for heavier workloads
- DDR3L 1600 CL11 1.35 V matches Synology DS1817+ RS818+ RS818RP+ RS1219+ specs
- JEDEC and RoHS compliant for warranty-safe upgrades
- 204-pin SODIMM form factor fits the four supported NAS models
- Two 8 GB unbuffered non-ECC modules install as a matched pair
Specifikace
| Brand | OWC |
|---|---|
| Part Number | 1S6T32R8016P |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3L Non-ECC SODIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology NAS DS1817+ Synology NAS RS818+ Synology NAS RS818RP+ Synology NAS RS1219+ |
Další verze tohoto modelu
Dalších 5 v této řadě
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
OWC
OWC 8GB (2x4GB) DDR3 1600 ECC UDIMM Kit Synology RC18015xs+ RS10613xs+ RS18016xs+ RS3413xs+ RS3614xs+
- 8GB (2 x 4GB)
- 240-Pin DDR3 ECC UD…
36,99 US$
0.0004806BTC
Skladem
OWC
OWC 16GB (2x8GB) DDR3L 1600 CL11 1.35V SODIMM Kit for Synology DS1517+ memory upgrade
- 16GB (2 x 8GB)
- 204-Pin DDR3L Non-E…
50,99 US$
0.00066249BTC
Skladem
OWC
OWC 16GB (2x8GB) DDR3 1600 ECC UDIMM memory upgrade
- 16GB (2 x 8GB)
- 240-Pin DDR3 ECC UD…
57,99 US$
0.00075344BTC
Skladem
OWC
OWC 16GB (2x8GB) DDR3 1600 CL11 ECC UDIMM 1.5V Synology memory upgrade
- 16GB (2 x 8GB)
- 240-Pin DDR3 ECC UD…
62,99 US$
0.0008184BTC
SklademOtázky k tomuto produktu
What does the 1600 MHz speed mean when the kit is installed in a Synology NAS?
The modules run at DDR3L 1600 (PC3L-12800) with CL11 latency, delivering the rated bandwidth the NAS memory controller supports.
How does the DDR3L 204-pin SODIMM interface limit the upgrade?
The kit uses the 204-pin DDR3L SODIMM standard at 1.35 V, so it only fits slots that accept DDR3L low-voltage modules.
What physical space is needed to install the two 8 GB sticks?
Each module is a standard 204-pin SODIMM without a heat spreader, requiring two adjacent SO-DIMM sockets in the NAS chassis.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00279328BTC
Skladem
