Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green DDR3L SODIMM sticks with gold contacts

OWC

OWC 16GB (2x8GB) DDR3L 1600 CL11 1.35V SODIMM kit for Synology DS1817+ RS818+ RS818RP+ RS1219+

SKU CH-5YN3-QKGR6

16 GB DDR3L 1600 SODIMM kit (2 × 8 GB, CL11, 1.35 V) validated for Synology DS1817+, RS818+, RS818RP+ and RS1219+ NAS models

  • Capacity16GB (2 x 8GB)
  • Type204-Pin DDR3L Non-ECC SODIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo

Capacity 16GB (2 x 8GB)

  • 16 GB kit expands NAS capacity for heavier workloads
  • DDR3L 1600 CL11 1.35 V matches Synology DS1817+ RS818+ RS818RP+ RS1219+ specs
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • 204-pin SODIMM form factor fits the four supported NAS models
  • Two 8 GB unbuffered non-ECC modules install as a matched pair

Synology NAS DDR3L kit

This 16GB kit contains two 8GB DDR3L SODIMM modules rated at 1600MHz with CL11 latency. It is built for Synology DS1817+, RS818+, RS818RP+ and RS1219+ units that accept 204-pin laptop memory. The modules run at 1.35V and are unbuffered non-ECC.

204-pin DDR3L 1.35V SODIMM

The decisive specification is the 204-pin DDR3L form factor at 1.35V. Systems requiring standard 1.5V DDR3, registered DIMMs, ECC modules or a different pin count will not accept these sticks. Verify the slot type before ordering.

NAS owners needing 16GB total

This kit suits administrators expanding a compatible Synology NAS to 16GB using matched pairs. Builders needing ECC protection, registered memory, higher capacities per slot, or a different voltage should look elsewhere.

Points forts

  • 16 GB kit expands NAS capacity for heavier workloads
  • DDR3L 1600 CL11 1.35 V matches Synology DS1817+ RS818+ RS818RP+ RS1219+ specs
  • JEDEC and RoHS compliant for warranty-safe upgrades
  • 204-pin SODIMM form factor fits the four supported NAS models
  • Two 8 GB unbuffered non-ECC modules install as a matched pair

Caractéristiques

BrandOWC
Part Number1S6T32R8016P
Capacity16GB (2 x 8GB)
Type204-Pin DDR3L Non-ECC SODIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSynology NAS DS1817+
Synology NAS RS818+
Synology NAS RS818RP+
Synology NAS RS1219+

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

What does the 1600 MHz speed mean when the kit is installed in a Synology NAS?

The modules run at DDR3L 1600 (PC3L-12800) with CL11 latency, delivering the rated bandwidth the NAS memory controller supports.

How does the DDR3L 204-pin SODIMM interface limit the upgrade?

The kit uses the 204-pin DDR3L SODIMM standard at 1.35 V, so it only fits slots that accept DDR3L low-voltage modules.

What physical space is needed to install the two 8 GB sticks?

Each module is a standard 204-pin SODIMM without a heat spreader, requiring two adjacent SO-DIMM sockets in the NAS chassis.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.