NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Replace Power
A 220 W Flex-ATX unit with 24-pin, 4-pin and Sata connectors for 115 / 230 V input
This 220W proprietary power supply replaces the HP 633195-001 and Bestec FH-ZD221MGR units. It fits the HP TouchSmart 310-1205la desktop and many other slimline systems requiring a Flex-ATX form factor. The grey housing weighs 1 kg and accepts 115 or 230 V input.
Builders who need higher wattage for discrete graphics cards or additional drive bays should look at something else. Systems requiring standard ATX dimensions or different connector layouts cannot use this unit. The proprietary design limits compatibility to the listed HP and compatible slimline models.
The connector set determines whether this PSU matches the target motherboard and storage devices. Verify that the host board uses a 24-pin main power socket and a 4-pin auxiliary socket. The two Sata power leads support compatible drives or peripherals.
| Brand | Replace Power |
|---|---|
| Color | Grey |
| Type | Proprietary Power Supply |
| Weight | 1 |
Align the proprietary Flex-ATX housing with the chassis rails, secure the mounting screws, then attach the 24 pin motherboard connector, the 4 pin connector and the two Sata connectors. The step often missed is fully seating the 4 pin CPU power plug, which can prevent the system from posting.
The internal fan and electrolytic capacitors are the components that age. Expect to clean dust from the fan intake every 6 to 12 months and plan on replacing the supply if voltages drift or the fan becomes noisy after several years of continuous operation.
The 220 watt maximum output is the hard ceiling. Sustained loads near that level will hit the over-current protection on the 12 volt rail first, causing the unit to shut down before thermal limits are reached.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?