Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR4 UDIMM sticks with black heat spreaders and gold contacts

RIMLANCE

RIMLANCE 16GB (2x8GB) DDR4 2666 CL19 1.2V UDIMM desktop RAM

SKU CH-QD1T-EJA5Z

A 16GB dual-channel DDR4 kit running at 2666MHz with CL19 latency and 1.2V operation for standard desktop upgrades

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • 16 GB dual-channel kit enables smooth multitasking
  • 2666 MHz DDR4 speed delivers responsive everyday performance
  • CL19 latency supports stable system operation
  • 2 V standard voltage reduces power draw and heat
  • 288-pin UDIMM fits most consumer desktop motherboards

16GB DDR4 kit for desktop upgrades

This RIMLANCE kit provides 16GB of memory as two 8GB UDIMM modules built for DDR4 platforms. It targets users who want a straightforward capacity increase for everyday multitasking and office workloads. The unbuffered, non-ECC design matches standard consumer motherboard requirements. Installation follows the usual 288-pin DIMM procedure without extra configuration steps.

Thermals noise and power at 1.2V

Operating at the standard 1.2V DDR4 voltage, the modules draw minimal power and produce little heat during typical desktop use. No active cooling is required and the sticks run silently inside the case. The low voltage also helps keep overall system power draw modest under normal multitasking loads. Stable operation is maintained at the rated 2666MHz speed with CL19 latency.

Replaces older DDR4 sticks or fills empty slots

This kit upgrades systems running slower DDR4 speeds or smaller capacities such as single 8GB modules. The jump is worthwhile when the motherboard supports 2666MHz and the user needs more headroom for browser tabs, office suites or light content creation. It does not suit builds that require ECC, registered DIMMs or speeds beyond the PC4-21300 rating.

Přednosti

  • 16 GB dual-channel kit enables smooth multitasking
  • 2666 MHz DDR4 speed delivers responsive everyday performance
  • CL19 latency supports stable system operation
  • 2 V standard voltage reduces power draw and heat
  • 288-pin UDIMM fits most consumer desktop motherboards

Specifikace

BrandRIMLANCE
ModelRUD21300S6C2K16
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset

Otázky k tomuto produktu

How do I install these 288-pin DDR4 UDIMM modules and what is the common mistake?

Align the notch on each 288-pin module with the slot key, press straight down until both retention clips click, and ensure the motherboard is powered off; the common mistake is seating only one side so the clip on the other side stays open.

What maintenance or replacement will this 16GB kit need over time?

No scheduled maintenance is required; keep the gold contacts clean and ensure case airflow stays adequate. If a module fails, replace the faulty 8GB stick with another DDR4 2666 CL19 1.2V UDIMM of matching capacity.

What limit appears first when this memory runs at 2666MHz under sustained load?

The CAS latency of CL19 at 1.2V sets the timing floor; under continuous heavy throughput the fixed latency and voltage become the bottleneck before thermal limits on standard unbuffered DDR4 modules.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.