Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two black square thermal pads 100 by 100 by 1.5 mm

Thermal Grizzly

Thermal Grizzly Minus Pad Basic 2-pack thermal pad 100x100x1.5mm

SKU CH-29KY-3064R

Two 100 x 100 mm pads, 1.5 mm thick, non-conductive thermal interface for SSDs, GPUs and other electronics

  • FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the
  • Good thermal conductivity for efficient heat transfer
  • Electrically non-conductive design prevents short circuits
  • 100 x 100 mm size fits SSDs and GPU coolers
  • 5 mm thickness fills gaps on memory and VRM
  • Two-pack provides spare pads for multiple components

Thermal pad for SSDs and GPUs

Thermal Grizzly Minus Pad Basic pads provide a non-conductive thermal interface for solid-state drives, graphics card coolers and other board-level components. The 100 x 100 mm sheets can be cut to match the exact area of each chip or module. Two pads are included in the pack for multiple installation points.

Thermals and handling

The pads deliver good thermal conductivity to move heat away from memory modules and voltage regulators under normal loads. Being electrically non-conductive eliminates the risk of short circuits if material bridges adjacent contacts. Lower compressibility compared to higher-tier variants means the pads retain shape during repeated mounting cycles.

Build integration

Each 1.5 mm thick sheet fits standard gap heights found on many SSD and GPU cooler designs without additional shimming. The material is ready to use straight from the package and requires no curing time or special tools. Users needing higher compressibility or maximum conductivity may prefer the Advance or Pro series instead.

Přednosti

  • Good thermal conductivity for efficient heat transfer
  • Electrically non-conductive design prevents short circuits
  • 100 x 100 mm size fits SSDs and GPU coolers
  • 5 mm thickness fills gaps on memory and VRM
  • Two-pack provides spare pads for multiple components

Specifikace

BrandThermal Grizzly
ModelTG-MP-B-100-100-15-2
Part NumberTG-MP-B-100-100-15-2
FeaturesThermal Grizzly Minus Pad Basic thermal pads are part of the Basic, Advance, and Pro series. The Basic pads are easy to use, provide good thermal conductivity, slightly lower compressibility, and offer an excellent price-performance Ratio.

Otázky k tomuto produktu

How do I install the 1.5 mm thick pad on an SSD or GPU cooler, and what step is often missed?

Cut the 100 x 100 mm sheet to size, peel both protective films, place the pad on the clean component, then mount the heatsink with even pressure so the 1.5 mm gap fills without air pockets.

When will the Minus Pad Basic need replacement in a GPU or SSD application?

The electrically non-conductive silicone compound does not dry out; plan to replace it only when you disassemble the cooler or if the pad is torn during a future upgrade.

What thermal limit appears first during sustained heavy loads on a graphics card or SSD?

The pad’s good thermal conductivity and slightly lower compressibility mean the component’s own thermal throttle point will be reached before the pad saturates.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.